1771-IBD Allen-Bradley Brand New 10-30VDC PLC Module

Availability: 20 left in stock

Product Overview The Allen-Bradley 1771-IBD functions as a high-density, discrete DC interface card for the Rockwell Automation PLC-5 control platform....

SKU: 1771-IBD

Manufacturer: Allen Bradley
Product No.: 1771-IBD
Product Type: Digital Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The Allen-Bradley 1771-IBD functions as a high-density, discrete DC interface card for the Rockwell Automation PLC-5 control platform. This module populates any standard peripheral slot of a 1771 I/O chassis, converting raw binary (ON/OFF) signals from field devices into logic-level data for the central processor. Operating across a flexible 10 to 30 VDC voltage span, the 1771-IBD accepts inputs from proximity switches, limit sensors, photoelectric eyes, and selector switches. Control engineers integrate this sinking input module into manufacturing lines, material handling systems, and processing plants to monitor machine states cleanly while keeping field voltage isolated from the backplane.

Technical Specifications

Parameter	Specification Value
Manufacturer	Allen-Bradley / Rockwell Automation
Model Number	1771-IBD
Product Classification	Digital DC Input Module
System Compatibility	Allen-Bradley PLC-5 Systems and 1771 I/O Chassis
Chassis Restrictions	Fits all 1771 frames except legacy 1771-A1, -A2, and -A4
Number of Field Inputs	Sixteen (16) independent discrete points
Voltage Configuration	10 to 60 VDC maximum absolute span, Sinking (Source Load)
DC Operating Window	10 to 30 VDC nominal operating range
Maximum Off-State Current	2.0 milliamperes allowable leakage
Input Delay Time (OFF to ON)	1 millisecond hardware response filter
Input Delay Time (ON to OFF)	Selectable 1 millisecond or 6 millisecond filter
Isolation Topology	Optical isolation barriers between field loops and backplane
Backplane Current Draw	130 milliamperes maximum at 5.0 VDC (plus/minus 5 percent)
Maximum Power Dissipation	7.3 Watts peak thermal output
Minimum Power Dissipation	1.0 Watt internal base state
Maximum Thermal Emission	24.7 BTU per hour under full load
Backplane Keying Position 1	Plastic tab slot insertion between pins 10 and 12
Backplane Keying Position 2	Plastic tab slot insertion between pins 16 and 18
Field Wiring Arm Interface	Cat. No. 1771-WH or 1771-WN terminal assemblies
Wiring Arm Screw Torque	7 to 9 inch-pounds mounting pressure
Net Module Mass	0.45 kg (1.00 lbs) unpopulated state
Physical Dimensions	290 mm x 38 mm x 150 mm (H x W x D)
Operating Thermal Window	0 to +60 degrees Celsius
Storage Temperature Limits	-40 to +85 degrees Celsius dry ambient
Procurement Supply Profile	100 percent Brand New and Original in Factory Packing

Engineering Advantages

Fast-Acting 1ms Signal Filtering Captures High-Velocity Transients

High-speed indexing tables, packaging machinery, and sorting conveyors require immediate input tracking to ensure proper mechanical alignment. The 1771-IBD utilizes a low-latency hardware filter that registers input state changes from OFF to ON in just 1 millisecond. This quick-scan capability enables the central PLC-5 processor to capture fleeting sensor pulses instantly, preventing missed parts or timing synchronization drifts that occur with sluggish, commercial-grade input blocks.

Onboard Optical Barriers Block Field-Side Electrical Surges

Field-side signal loops running through sprawling factories often pass heavy inductive equipment, which couples transient voltage spikes and high-frequency noise into signal lines. The 1771-IBD isolates this noise at the module boundary by embedding high-speed optical isolation circuits. Because light pulses bridge the gap between the field wiring arm and the logic bus instead of copper traces, severe field overvoltages cannot breach the barrier, keeping the 1771 backplane and central processor safe from catastrophic damage.

Dual-Point Plastic Keying Prevents Destructive Card Swapping

In crowded marshalling panels housing a mixture of AC and DC signals, a technician could mistakenly slide a low-voltage DC card into a high-voltage AC slot during emergency maintenance. The 1771-IBD neutralizes this danger through dual-point physical backplane keying slots located between pins 10/12 and pins 16/18. These molded guides match physical plastic bands inserted onto the chassis backplane, mechanically preventing the 1771-IBD from seating into an incorrectly wired slot.

FAQs

What specific wiring arms interface with the 1771-IBD, and how do you install them?

The 1771-IBD interfaces natively with the 1771-WH or 1771-WN field wiring arms. The wiring arm clips directly onto the chassis frame pivot points in front of the module, meaning you do not disconnect field wires when swapping a card. When securing field wires to the arm terminals, technicians must torque the terminal screws to between 7 and 9 inch-pounds to prevent loose connections or stripped threads.
Can this sinking input module handle sourcing (PNP) field sensors directly?

No. The 1771-IBD features a sinking electrical topology, meaning the input points require a current path to ground to register an ON state. Consequently, you must pair this module with sourcing field devices (such as mechanical dry contacts wired to the positive VDC rail or PNP transistor outputs). Connecting a sinking (NPN) sensor directly to these terminals will prevent the module from sensing the voltage transition cleanly.
How do you configure the selectable ON-to-OFF input signal delay time?

The 1771-IBD provides a selectable hardware filter configuration for the ON-to-OFF transition path, allowing technicians to toggle between a fast 1 millisecond response or a dampened 6 millisecond filter. This delay adjustment helps engineers smooth out electrical contact bounce from aging mechanical limit switches. You select the target delay window via internal module jumpers before sliding the card into the active chassis track.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.