1771-IMD Allen-Bradley PLC 5 Datasheet & Technical Manual

Availability: 20 left in stock

Allen-Bradley 1771-IMD PLC 5 Digital AC/DC Input Module Configured for discrete high-voltage level detection in PLC-5 platforms, the Allen-Bradley 1771-IMD/B...

SKU: 1771-IMD/B

Manufacturer: Allen Bradley
Product No.: 1771-IMD/B
Product Type: Digital I/O Cards
Product Origin: USA
Payment:T/T, Western Union
Weight: 1050g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Allen-Bradley 1771-IMD PLC 5 Digital AC/DC Input Module

Configured for discrete high-voltage level detection in PLC-5 platforms, the Allen-Bradley 1771-IMD/B (1771-IMD Digital AC/DC Input Module) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	1771-IMD
Brand	Allen-Bradley
Origin	USA
Weight	2.31 lbs (1.05 kg)
Dimensions	Standard 1771 chassis slot size
Operating Temp	0 to 60 deg C
Power Consumption	Backplane current: 250 mA @ 5 VDC
Number of Inputs	16 channels
Nominal Voltage	220 V AC/DC
AC Operating Voltage	184 to 250 V AC
DC Operating Voltage	166 to 230 V DC
Max AC Off-State Current	13.0 mA
Max DC Off-State Current	0.25 mA
Typical AC Signal Delay	On: 15 (+/- 8) ms / Off: 172 (+/- 56) ms
Typical DC Signal Delay	On: 15 (+/- 8) ms / Off: 172 (+/- 56) ms
Wiring Arm Option	1771-WH / 1771-WA
Enclosure Type	Open-style (Rack mountable)

Industrial Control & Drive Integration

The 1771-IMD manages discrete signal processing synchronized with the backplane bus communication velocity constraints of the legacy 1771 rack infrastructure. The hardware coordinates wide-area I/O density scaling routines by feeding state registers back to central processors linked across Profinet / EtherNet/IP deterministic networks via communication adapters. Ensuring verified firmware flash compatibility across all adjacent processing blocks is necessary to stabilize input filter updates and guarantee that the 16-channel switching states map into the processor image table without cyclic timing mismatches.

Frequently Asked Questions

Q: Does the 1771-IMD allow Removal and Insertion Under Power (RIUP)?

A: No. The 1771 I/O chassis backplane structure does not support hot-swapping functionality. The primary power supply feeding the rack must be completely isolated and de-energized prior to inserting or removing this input module to prevent physical degradation of the electrical contacts or logic gates.

Q: How are field wiring connections established for this 16-channel module?

A: Field connections are landed on a dedicated terminal structure using either the 1771-WH or 1771-WA wiring arm. This allows the module to be extracted for maintenance without lifting individual high-voltage AC or DC field loop conductors.

Field Installation Guidelines

Chassis Slot Mechanical Alignment: Power down the assembly. Align the top and bottom circuit board margins with the plastic tracks of the designated slot in the 1771 chassis. Slide the module inward until the rear connectors mate securely with the backplane plane, then lock the chassis retaining clips.
Sensing Loop Grounding Protocols: Route the 220 V field sensing wires through the plastic routing guides of the wiring arm. Maintain strict separation between these high-voltage lines and low-voltage communication paths to suppress high-frequency electromagnetic noise injection.
Enclosure Earth Grounding: Ensure that the 1771 rack chassis frame is bonded directly to the main cabinet functional ground bar via a low-impedance conductor. Continuous structural grounding is required to ensure reliable logic tracking and to safeguard optical isolation pathways.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.