2711C-T6T Allen-Bradley PanelView Component Datasheet & Technical Manu

2711C-T6T Allen-Bradley PanelView Component Datasheet & Technical Manual

Availability: 20 left in stock

Allen-Bradley 2711C-T6T PanelView Component HMI Terminal The Allen-Bradley 2711C-T6T, also cataloged as the 2711C-T6T HMI Terminal, operates as a dedicated...

SKU: 2711C-T6T

Manufacturer: Allen Bradley
Product No.: 2711C-T6T
Product Type: HMI Terminals
Product Origin: USA
Payment:T/T, Western Union
Weight: 740g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Allen-Bradley 2711C-T6T PanelView Component HMI Terminal

The Allen-Bradley 2711C-T6T, also cataloged as the 2711C-T6T HMI Terminal, operates as a dedicated hardware component for operator input and process visualization within CompactLogix, MicroLogix, and related controller networks.

Hardware Specifications

Parameter	Specification
Model	2711C-T6T
Brand	Allen-Bradley
Origin	USA
Weight	1.63 lbs (0.74 kg)
Dimensions	185 x 130 x 65 mm (7.28 x 5.12 x 2.56 in)
Operating Temp	0 to 50 deg C (32 to 122 deg F)
Power Consumption	Nominal 24 VDC (Input voltage range: 18-30 VDC)
Display Type	Color TFT LCD with LED backlight
Screen Size	6 Inches
Resolution	320 x 240 pixels (QVGA) / 800 x 480 pixels (WVGA variant dependent)
Operator Input	Analog resistive touchscreen
Embedded Operating System	Windows CE 7.0
Communication Ports	1 x Ethernet (EtherNet/IP), 1 x RS-232/RS-485, 1 x USB Host, 1 x USB Device
Storage Interface	SD Card port included
Relative Humidity	0 to 95% non-condensing
Enclosure Rating	NEMA Type 12, 13, IP66, 4X indoor use only

Industrial Control & Drive Integration

The 2711C-T6T manages interface graphic processing loops synchronized with the backplane bus communication velocity properties of connected processing nodes. The operator terminal implements automated register data exchange and I/O density scaling displays by processing logic frames broadcast over Profinet / EtherNet/IP deterministic networks or point-to-point serial typologies. Verifying firmware flash compatibility across the terminal base, embedded core modules, and master controllers is required to maintain transmission timing tolerances and prevent interface update failures or packet framing drops.

Frequently Asked Questions

Q: Can the 2711C-T6T retain internal system time variables independently during an unpowered state?

A: Yes. The terminal contains an integrated real-time clock that supports battery backup functionality. This circuit keeps timestamp counters current for system alerts and data logs when the primary 24 VDC input supply is disconnected.

Q: Is the resistive touchscreen grid designed to tolerate operation via standard mechanical tools or hand coverings?

A: Yes. The analog resistive layer detects physical compression rather than surface capacitance. Operators can execute on-screen register entry and navigation sequences using bare fingers, heavily gloved hands, or passive synthetic stylus devices.

Field Installation Guidelines

Panel Cutout Mechanical Fastening: Mount the HMI unit directly into a prepared cutout template within the control cabinet facade. Tighten the integrated panel-mounting clamps progressively around the chassis frame until the perimeter rubber gasket is uniformly compressed to seal against IP66 entry vectors.
Electrical Supply Configuration: Secure a continuous 24 VDC feed to the terminal block interface within the 18-30 VDC operating margin. Run power routing through a separate conduit from high-voltage motor controls or inductive cross-connections to mitigate transient voltage dips.
Shield Bonding and Ground Reference: Secure a low-impedance ground conductor from the terminal functional earth screw to the main copper enclosure ground plane. Continuous grounding path maintenance is mandatory to suppress high-frequency line noise that can degrade serial or Ethernet transceiver performance.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.