2711P-RDT10C Allen-Bradley PanelView Plus 1000 Datasheet & Technical M

2711P-RDT10C Allen-Bradley PanelView Plus 1000 Datasheet & Technical Manual

Availability: 20 left in stock

Allen-Bradley 2711P-RDT10C PanelView Plus 1000 Display Module The Allen-Bradley 2711P-RDT10C serves as the primary 2711P-RDT10C Display Module utilized to execute...

SKU: 2711P-RDT10C

Manufacturer: Allen Bradley
Product No.: 2711P-RDT10C
Product Type: VGA Display Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1810g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Allen-Bradley 2711P-RDT10C PanelView Plus 1000 Display Module

The Allen-Bradley 2711P-RDT10C serves as the primary 2711P-RDT10C Display Module utilized to execute [Specific Technical Task] across PanelView Plus 1000 platforms.

Hardware Specifications

Parameter	Specification
Model	2711P-RDT10C
Brand	Allen-Bradley
Origin	USA
Weight	4.00 lbs (1.81 kg)
Dimensions	12.48 x 10.47 x 4.57 in (317 x 266 x 116 mm)
Operating Temp	0 to 55 deg C
Power Consumption	Powered via host terminal logic module base
Operator Input Option	Analog resistive touchscreen
Graphics Type	Color TFT LCD
Display Size	10.4 Inches
Resolution	640 x 480 pixels (VGA)
Color Support	18-bit (262,144 colors)
Backlight Type	Replaceable CCFL (50,000 hours typical half-life)
Operating Shock	15 g peak for 11 ms
Non-Operating Shock	30 g peak for 11 ms
Operating Altitude	Up to 2000 m above sea level
Relative Humidity	5% to 95% non-condensing
Enclosure Type Rating	NEMA Type 12, 13, 4X indoor use only

Industrial Control & Drive Integration

The 2711P-RDT10C manages real-time visualization matrices synchronized directly with the backplane bus communication velocity properties of the host PanelView assembly. Real-time register graphics scale dynamically based on I/O density scaling routines executed within connected control logic modules. To prevent communication latency or display flickering when rendering high-density operational data fields across Profinet / EtherNet/IP deterministic networks, strict firmware flash compatibility must be validated between this interface hardware and the corresponding logic processing unit.

Frequently Asked Questions

Q: Can the 2711P-RDT10C operate as an independent standalone Human Machine Interface (HMI)?

A: No. The 2711P-RDT10C is a dedicated display sub-assembly module containing only the physical LCD panel, backlight, and resistive touch matrix. It requires mechanical coupling and electrical mating with a compatible PanelView Plus 1000 logic module to establish processing and communication capabilities.

Q: What mitigation actions must be taken if the backlight goes out or drops below functional luminosity limits?

A: The display contains a replaceable cold-cathode fluorescent lamp (CCFL) backlight component. When operational hours approach the 50,000-hour threshold, the backlight assembly can be extracted and replaced from the rear of the unpowered module housing without replacing the entire liquid crystal display grid.

Field Installation Guidelines

Mechanical Panel Cutout Alignment: Prepare the enclosure panel cutout to match the specified dimensions of the 1746/1747 Bulletin scale footprint. Guide the module into the panel opening, making sure the integrated perimeter sealing gasket sits flush against the exterior panel plate to maintain NEMA Type 4X indoor protection levels.
Securing Torque Layout: Install the provided mounting clips into the slots around the perimeter of the display module. Tighten the mounting screws in an alternating sequence to the specified torque limit to prevent faceplate warping or cracking of the analog resistive touchscreen layer.
Electrical Ground Integrity: Ensure the host logic chassis is grounded via a low-impedance conductor back to the main enclosure structural ground bus. A clean reference ground connection is required to eliminate high-frequency electrical noise that could introduce coordinate drift or false touch registrations into the analog resistive touch matrix.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.