330101-00-24-10-02-05 Bently Nevada Proximity Sensor Datasheet

330101-00-24-10-02-05 3300 XL 8 mm Proximity Probe | Bently Nevada

330101-00-24-10-02-05 3300 XL 8 mm Proximity Probe | Bently Nevada

Availability: 10 left in stock

Configured for displacement measurement in rotating machinery, the Bently Nevada 330101-00-24-10-02-05 (330101 8 mm Proximity Probe) provides direct physical execution...

SKU: 330101-00-24-10-02-05

Manufacturer: Bently Nevada
Product No.: 330101-00-24-10-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for displacement measurement in rotating machinery, the Bently Nevada 330101-00-24-10-02-05 (330101 8 mm Proximity Probe) provides direct physical execution of gap-to-voltage conversion for vibration and position monitoring.

Suffix Breakdown & Model Matrix

Option Component	Selection	Description
Model	330101	3300 XL 8 mm Proximity Probe
Unthreaded Length	00	0.0 inches
Case Length	24	2.4 inches
Total Length	10	1.0 meter
Connector Type	02	Miniature coaxial ClickLoc
Agency Approval	05	CSA, ATEX, IECEx

Hardware Specifications

Parameter	Specification
Model	330101-00-24-10-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.323 kg
Dimensions	3/8-24 UNF thread, 2.4 in case length
Operating Temp	-51 deg C to +177 deg C
Power Consumption	Driven by 3300 XL Proximitor Sensor
Tip Material	Polyphenylene sulfide (PPS)

Bently Nevada Mechanical Monitoring and TSI Characteristics

The 330101 probe system utilizes eddy-current probe scaling to convert target distance into a linear voltage signal, typically calibrated to 7.87 V/mm (200 mV/mil). Proper gap voltage validation against -10 VDC targets at the center of the linear range is mandatory to ensure accurate rotor dynamics monitoring. Installers must prioritize cross-talk suppression by maintaining specified physical separation between adjacent probes to prevent electromagnetic interference. Shielded coaxial cables must be utilized to maintain signal integrity between the probe and the Proximitor sensor.

Frequently Asked Questions

Q: Does the 05 suffix permit installation in explosive atmospheres?

A: Yes. The 05 approval option indicates that the probe is certified for hazardous area use (CSA, ATEX, IECEx), provided the installation complies with local intrinsic safety standards and utilizes compatible barriers.

Q: Can the 1.0 m cable be shortened or extended?

A: No. The system length is factory-calibrated. Altering the cable length changes the system's impedance, which will result in incorrect voltage output and loss of linearity.

Field Installation Guidelines

Ensure the probe mounting bracket is rigid to avoid resonance.
Install the probe perpendicular to the target surface; misalignment exceeding 5 degrees can degrade the linearity of the measurement.
Validate the gap voltage at the Proximitor sensor output during installation to ensure the sensor is operating at the -10 VDC target.
Secure the probe using the included jam nuts to prevent movement due to machine vibration.
Ensure the ClickLoc connector is fully engaged until a tactile click is felt, and route the cable to prevent strain on the connection point.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.