Configured for vibration and displacement monitoring in 3300 XL Transducer System platforms, the Bently Nevada 330102-00-20-10-02-00 (330102 Proximity Probe) provides direct physical/electrical execution. The instrument transforms physical proximity gaps between the sensor face and a conductive target into a precise high-frequency radio frequency modulation loop without mechanical contact.
Suffix Breakdown & Model Matrix
- 330102: Base component designator for 3300 XL 8 mm proximity probe utilizing a 3/8-24 UNF thread and integrated stainless steel armor.
- -00: Unthreaded length option defining 0.0 inches of exposed smooth barrel.
- -20: Overall case length option defining 2.0 inches of total threaded housing length.
- -10: Total length option dictating a 1.0 metre (3.3 feet) integrated cable path.
- -02: Miniature coaxial ClickLoc connector matched with standard electrical cable.
- -00: Agency approval option indicating no hazardous area certifications are required for the installation point.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330102-00-20-10-02-00 |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | 0.323 kg |
| Dimensions | 8 mm probe tip diameter, 2.0 inches overall case length, 3/8-24 UNF thread |
| Operating Temp | -51 deg C to +177 deg C |
| Power Consumption | Passive component powered via external Proximitor Sensor excitation |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Cable Assembly | Armored standard cable with coaxial core |
| Connector Type | ClickLoc miniature coaxial connector |
Mechanical Monitoring & TSI Technical Attributes
The physical measurement mechanism functions via specialized eddy-current probe scaling tuned precisely against an AISI 4140 steel target surface. To verify baseline measurement linear accuracy, field engineers must perform an explicit gap voltage validation targeting a nominal -10 VDC baseline at the physical mid-point of the system's linear range. Correct installation positioning ensures accurate monitoring of high-frequency shaft behavior and complex rotor dynamics. Additionally, the integrated stainless steel armor sheath provides natural attenuation characteristics that optimize cross-talk suppression when multiple signal cables occupy shared terminal junction enclosures.
Frequently Asked Questions
Q: What physical handling limit prevents signal degradation at the miniature coaxial interface?
A: The ClickLoc coaxial connector must never be turned or pulled using pliers or standard mechanical clamping tools. Excessive force deforms the internal gold-plated pin, resulting in permanent shifts in loop impedance and calibration drift.
Q: How does the integrated armor affect the routing properties of the 1.0 metre cable?
A: The flexible stainless steel armor provides mechanical protection against sharp edges but enforces a strict minimum bend radius limitation of 25.4 mm. Exceeding this bend threshold can crimp the internal coaxial dielectric.
Q: Is a standalone probe capable of transmitting a standard 4-20 mA process signal?
A: No. The probe acts purely as a variable inductive element. It must connect directly to a matched 3300 XL Proximitor Sensor to convert the raw RF modulation into a standard linear 200 mV/mil output.
Field Installation Guidelines
- Inspect the 3/8-24 UNF mounting hole to ensure it is tapped straight, free of burrs, and clear of metallic chips or cutting oil.
- Thread the probe body into the mounting bracket or machine housing manually to eliminate any potential for cross-threading.
- Hook a calibrated digital multimeter to the proximal terminal block of the Proximitor Sensor to capture the active DC output.
- Advance or retract the probe housing inside the mounting block until the gap voltage validation matches the baseline of -10 VDC.
- Torque the structural locknut tightly against the mounting frame to preserve the verified air gap, then secure the ClickLoc connector using self-fusing insulation wrap to shield the junction from structural earth loops.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 330101-00-12-05-02-05 Proximity Probe
$99.00
$199.00
330101-00-12-10-02-05 | Bently Nevada | Proximity Probe
$99.00
$199.00
330101-00-10-10-02-CN Bently Nevada Proximity Probe
$99.00
$199.00
330101-00-08-20-02-05 Extension Cable | Bently Nevada
$99.00
$199.00
Bently Nevada 330101-00-08-10-02-00 Proximity Probe
$99.00
$199.00
Bently Nevada 330101-00-08-05-02-00 Proximity Probe
$99.00
$199.00
Guide
Translation missing: en.general.search.loading