330103-08-13-10-02-05 Bently Nevada Proximity Probe Datasheet & Technical Manual

330103-08-13-10-02-05 | Bently Nevada | 3300 XL Proximity Probe

330103-08-13-10-02-05 | Bently Nevada | 3300 XL Proximity Probe

Availability: 10 left in stock

The Bently Nevada 330103-08-13-10-02-05, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for proximity and...

SKU: 330103-08-13-10-02-05

Manufacturer: Bently Nevada
Product No.: 330103-08-13-10-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 100g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330103-08-13-10-02-05, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for proximity and vibration sensing within 3300 XL machinery monitoring platforms. The hardware executing the physical displacement verification translates mechanical rotor dynamics into proportional voltage deviations via high-frequency eddy-current probe scaling circuits.

Suffix Breakdown & Model Matrix

Suffix Code	Option Description	Technical Parameter
330103	Base Model	3300 XL 8 mm Proximity Probe
-08	Unthreaded Length Option	80 mm
-13	Overall Case Length Option	130 mm
-10	Total Length Option	1.0 meter (3.3 feet)
-02	Connector and Cable Type Option	Miniature coaxial ClickLoc connector, 75 Ohm FluidLoc coaxial cable
-05	Agency Approval Option	Multiple global hazardous area approvals (ATEX/IECEx/CSA standard)

Hardware Specifications

Parameter	Specification
Model	330103-08-13-10-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.1 kg
Dimensions	8.0 mm probe tip diameter, 130 mm case length
Operating Temp	-51 deg C to +177 deg C nominal parameters
Power Consumption	Passive component driven via external Proximitor Sensor loop
Impedance	75 Ohm nominal (coaxial cable)
Cable Structure	FluidLoc moisture-resistant configuration

Gap Voltage Validation and Rotor Dynamics

Physical deployment of this 8 mm sensor requires meticulous gap voltage validation to map structural movements accurately within the linear calibration window. During static mechanical calibration, the physical gap must be adjusted until the circuit output tracks a -10 VDC target, anchoring the system at its linear midpoint. This baseline voltage optimization ensures the eddy-current probe scaling correctly interprets high-velocity rotor dynamics, avoiding signal degradation or saturation during peak operational vibration cycles.

Frequently Asked Questions

Q: Does this passive proximity probe assembly support field-swapping without full loop re-calibration?

A: Yes. The 3300 XL 8 mm series probes feature matched internal electrical properties, allowing direct component interchangeability without requiring manual field calibration of the associated Proximitor.

Q: What are the continuous performance risks if the total electrical length deviates from the 1.0-meter specification?

A: Splicing or modifying the physical cable length alters total loop inductance and capacitance. This directly distorts the eddy-current tuning calibration, causing scaling errors and shifting the nominal -10 VDC baseline position.

Field Installation Guidelines

Mount the probe thread body directly into a heavy-duty bracket to isolate the internal assembly from secondary structural resonance. Ensure adequate physical clearance is maintained between the 8.0 mm tip and surrounding conductive metals to prevent unintended peripheral eddy-current interaction. Thread the assembly into the port until the dynamic gap voltage stabilizes at precisely -10 VDC on a calibrated digital voltmeter. Secure the outer locknuts to standard engineering torque limits to eliminate drift caused by operational thermal expansion. Keep the ClickLoc coaxial connection interface clean and dry within a sealed conduit box.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.