330104-00-14-10-02-05 Bently Nevada Proximity Probe

330104-00-14-10-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe

330104-00-14-10-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe

Availability: 10 left in stock

The Bently Nevada 330104-00-14-10-02-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for non-contacting vibration...

SKU: 330104-00-14-10-02-05

Manufacturer: Bently Nevada
Product No.: 330104-00-14-10-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330104-00-14-10-02-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for non-contacting vibration and displacement measurement within machinery monitoring platforms. The module functions by converting proximity variations between its tip and a target shaft into proportional voltage output variables when combined with a corresponding proximitor circuit.

Hardware Specifications

Parameter	Specification
Model	330104-00-14-05-02-05
Brand	Bently Nevada
Origin	U.S.A.
Weight	0.323 kg
Dimensions	140 mm overall case length, 1.0 m total cable length
Operating Temp	-51 deg C to +177 deg C
Power Consumption	Passive sensor element (excitation provided by proximitor)
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Unthreaded Length	0 mm
Overall Case Length	140 mm
Total Length	1.0 meter (3.3 feet)
Connector Configuration	Miniature coaxial ClickLoc connector, standard cable
Agency Approval	CSA, ATEX, IECEx Approvals

Machinery Monitoring and TSI Characteristics

This eddy-current probe relies on definitive scaling parameters to maintain loop accuracy across variable machine speeds. During field positioning, cross-talk suppression must be enforced by maintaining a minimum physical clearance between adjacent probe tips to prevent radio frequency interference from corrupting the dynamic signals. Field technicians must perform gap voltage validation to verify that the physical position corresponds to the linear center of the calibration curve. The probe output drives the transducer loop to target an initial bias voltage of -10 VDC, ensuring optimal linear range capture for structural tracking and rotor dynamics analysis under fluctuating thermal profiles.

Frequently Asked Questions

Q: What specific requirements must be met when selecting cable lengths for the 3300 XL sensor loop?

A: The complete proximity sensor loop must be configured for a total electrical length of 5.0 meters or 9.0 meters. Because this probe model contains an integrated 1.0-meter cable, it must be paired with a matching 4.0-meter or 8.0-meter extension cable connected to the proximitor sensor. Failure to maintain this precise total electrical length will distort the calibrated scale factor.

Q: How do the hazardous area approvals impact the installation of this specific option?

A: The suffix option 05 provides certified compliance with CSA, ATEX, and IECEx safety standards. For installation inside classified hazardous areas, the probe must be wired using appropriate intrinsic safety barriers or galvanic isolators specified by Bently Nevada to restrict fault energy delivery.

Field Installation Guidelines

Mechanical Thread Engagement and Torque: Verify that the mounting boss threads match the probe housing specifications before insertion. Hand-tighten the probe body into position to prevent thread deformation, and then secure the assembly with the primary locknut using a torque wrench to ensure structural stability against machine casing vibration.
Connector Protection and Insulation: Clean the miniature coaxial ClickLoc connection surfaces with an approved solvent before locking them together. The external conductive surfaces of the connector joint must be wrapped in self-fusing tape or protected by a silicone boot to prevent electrical grounding contact with the internal conduit walls.
Routing and Bend Radius Minimums: Encase the integral cable within flexible armored conduit when routing through areas subject to mechanical impact or chemical spray. Maintain a minimum bend radius of 25.4 mm (1.0 inch) across all cable runs to preserve the internal coaxial geometry and shield integrity.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.