330400-02-00 Bently Nevada Acceleration Transducer

330400-02-00 Bently Nevada Accelerometer Acceleration Transducer

330400-02-00 Bently Nevada Accelerometer Acceleration Transducer

Availability: 10 left in stock

The Bently Nevada 330400-02-00, also cataloged as the 330400-02-00 Acceleration Transducer, operates as a dedicated hardware component for sensing seismic...

SKU: 330400-02-00

Manufacturer: Bently Nevada
Product No.: 330400-02-00
Product Type: Acceleration Transducers
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330400-02-00, also cataloged as the 330400-02-00 Acceleration Transducer, operates as a dedicated hardware component for sensing seismic vibration within industrial monitoring platforms.

Hardware Specifications

Parameter	Specification
Model	330400-02-00
Brand	Bently Nevada
Origin	USA
Weight	1.5 kg
Mounting Thread	M8 x 1 integral stud
Agency Approval	None
Operating Temp	Standard industrial range
Power Consumption	Loop-powered via vibration monitor

Eddy-Current Probe and Transducer Signal Validation

The 330400-02-00 transducer utilizes piezoelectric sensing technology to convert mechanical acceleration into an electrical signal. Unlike eddy-current probes that require -10 VDC targets for gap voltage validation, this accelerometer relies on charge-to-voltage conversion. Proper signal integrity must be maintained by ensuring the accelerometer mounting interface is flat and clear of debris to prevent high-frequency attenuation. Cross-talk suppression is achieved through the use of high-quality shielded cabling to prevent electromagnetic interference from influencing the low-level signal output before it reaches the monitor.

Frequently Asked Questions

Q: Does the 330400-02-00 require a specific mounting torque?

A: Yes. Ensure the transducer is tightened to the manufacturer's specified torque rating to maintain a rigid coupling with the machine casing, preventing resonance errors in the measurement band.

Q: Can this transducer be used in hazardous locations?

A: The -00 suffix indicates no specific agency approval. Do not install this unit in environments classified as explosive or hazardous without appropriate secondary isolation barriers.

Field Installation Guidelines

Ensure the mounting surface is machined flat to a 0.8 micrometer finish or better to ensure maximum frequency response.
Clean the mounting area and apply a thin layer of silicone grease to the base of the transducer to improve high-frequency contact.
Install the sensor using the integrated M8 x 1 stud. Ensure the cable is secured at short intervals to minimize cable whip and strain on the connector.
Verify continuity and shielding termination at the monitor end before powering the system to avoid signal noise.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.