The Bently Nevada 330854-040-24-00, also cataloged as the 330854 Extension Cable, operates as a dedicated hardware component for high-frequency signal transmission between proximity probes and Proximitor sensors within 3500 Machinery Protection System networks. It transmits excitation signals and conditions returned RF parameters to preserve physical displacement and dynamic vibration measurements across the transducer interface.
Suffix Breakdown & Model Matrix
The catalog ordering options for the 330854-040-24-00 extension cable define the following mechanical and environmental specifications:
- 330854: Base Model Designation for 3300 XL 25 mm Extension Cable.
- 040: Cable Length Option – 4.0 metres (13.1 feet).
- 24: Armor and Cable Option – High Temperature FluidLoc cable.
- 00: Agency Approval Option – No Approvals (Standard non-hazardous configuration).
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330854-040-24-00 |
| Brand | Bently Nevada |
| Origin | United States |
| Weight | Cable Weight: 45 g/m (Shipping Weight: 1.0 kg) |
| Dimensions | 4.0 m (13.1 ft) length |
| Operating Temp | -51 deg C to +177 deg C |
| Power Consumption | Passive physical media (0 W) |
| Cable Construction | High Temperature FluidLoc cable with internal liquid barrier |
| System Matching | 4.0 m cable (designed for matched total system length with 25 mm probe) |
| Connector Type | ClickLock miniature coaxial connectors |
Eddy-Current Probe Scaling and Signal Attenuation
The 330854-040-24-00 extension cable is engineered to maintain uniform electrical impedance across the high-frequency sensing loop, preserving linear eddy-current probe scaling for 25 mm proximity systems. High Temperature FluidLoc construction prevents process fluid ingress along the inner core conductor, protecting signal fidelity when routed through harsh machine enclosures.
During system commissioning, maintaining accurate gap voltage validation depends on zero resistance degradation through the coaxial junctions. The cable capacitance matches the 3300 XL Proximitor oscillator circuit tolerances, preventing calibration shifts in rotor dynamics tracking and maintaining cross-talk suppression between adjacent probe channels.
Frequently Asked Questions
Q: Can the 330854-040-24-00 extension cable be shortened or spliced in the field?
A: No. Cutting or splicing changes the total capacitance and inductance of the cable circuit. This alters the Proximitor sensor calibration curve, introducing significant scale factor errors into gap voltage readings and dynamic vibration measurements.
Q: What advantage does the High Temperature FluidLoc cable option (Option 24) offer over standard cable?
A: The FluidLoc cable construction includes an internal barrier that blocks oil, liquid hydrocarbon, and moisture migration through the inside of the cable jacket, preserving electrical properties in high-temperature, fluid-exposed environments.
Field Installation Guidelines
- Inspect the FluidLoc cable jacket and miniature ClickLock connectors for physical abrasion, kinks, or pin contamination before routing.
- Route the cable through dedicated junction boxes or metal conduit, maintaining a minimum static bend radius of 25.4 mm (1.0 in).
- Maintain a minimum separation of 300 mm between the extension cable and high-voltage AC power lines or VFD cabling to avoid inductive noise coupling.
- Align the coaxial connectors, push until the ClickLock mechanism latches securely, and slide a protective rubber boot over the junction.
- Perform gap voltage validation across the Proximitor output terminals using a digital multimeter; confirm the reading matches system targets (typically -10 VDC at static mechanical center).
- Connect the cable shield exclusively to instrument earth ground at the Proximitor rack end. Leave the shield floating at the probe side to prevent ground loops.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 330877-080-37-00 3300 XL 50 mm Extension Cable
$99.00
$199.00
Bently Nevada 330854-080-24-CN 3300 XL 25 mm Extension Cable
$99.00
$199.00
330854-040-24-CN Bently Nevada 3300 XL 25 mm Extension Cable
$99.00
$199.00
Bently Nevada 330854-040-24-05 3300 XL 25 mm Extension Cable
$99.00
$199.00
330801-28-05-101-03-02 Bently Nevada Proximity Probe
$99.00
$199.00
Bently Nevada 330730-080-02-00 3300 XL 11 mm Extension Cable
$99.00
$199.00
330730-080-00-00 Bently Nevada 3300 XL 11 mm Extension Cable
$99.00
$199.00
Bently Nevada 330730-040-03-00 3300 XL 11 mm Extension Cable
$99.00
$199.00
330730-040-01-00 Bently Nevada 3300 XL 11 mm Extension Cable
$99.00
$199.00
Bently Nevada 330730-040-00-CN 3300 XL 11 mm Extension Cable
$99.00
$199.00
Bently Nevada 330173-00-06-10-02-00 3300 5mm Proximity Probe
$99.00
$199.00
330171-00-94-10-02-00 Bently Nevada 3300 XL Proximity Probe
$99.00
$199.00
Bently Nevada 330171-00-12-10-01-05 Proximity Probe
$99.00
$199.00
330130-085-02-CN 3300 XL Extension Cable | Bently Nevada
$99.00
$199.00
Bently Nevada 330130-085-01-00 3300 XL Extension Cable
$99.00
$199.00
Guide
Translation missing: en.general.search.loading