330909-00-99-10-02-00 Bently Nevada Proximity Probes

330909-00-99-10-02-00 Bently Nevada 3300 NSv Proximity Probes

330909-00-99-10-02-00 Bently Nevada 3300 NSv Proximity Probes

Availability: 10 left in stock

The Bently Nevada 330909-00-99-10-02-00, also cataloged as the 3300 NSv Proximity Probes, operates as a dedicated hardware component for non-contact...

SKU: 330909-00-99-10-02-00

Manufacturer: Bently Nevada
Product No.: 330909-00-99-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330909-00-99-10-02-00, also cataloged as the 3300 NSv Proximity Probes, operates as a dedicated hardware component for non-contact shaft displacement and vibration measurement within 3300 NSv Proximity Transducer System platforms.

Suffix Breakdown & Model Matrix

The part number sequence defines the specific mechanical case option, cable length, termination hardware, and regulatory approvals for this probe:

330909: Base Model for 3300 NSv Probe (3/8-24 UNF thread with stainless steel armor)
00: Unthreaded Length option - 0.0 in
99: Case Length option - 9.9 in
10: Total Length option - 1.0 metre (3.25 feet)
02: Connector Option - Miniature coaxial ClickLoc connector, standard cable
00: Agency Approval Option - Not required

Hardware Specifications

Parameter	Specification
Model	330909-00-99-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.82 kg (Shipping weight: 2.0 kg)
Dimensions	3/8-24 UNF thread, 9.9 in case length, 0.0 in unthreaded length
Operating Temp	-51 to 177 deg C
Power Consumption	Passive transducer element powered by connected Proximitor Sensor loop
Thread Type	3/8-24 UNF thread with flexible armor
Total Cable Length	1.0 metre (3.25 feet)
Connector Type	Miniature coaxial ClickLoc connector
Agency Approval	Option 00 (Not required)

Rotor Dynamics & Gap Voltage Validation

The 3300 NSv proximity probe emits a high-frequency RF field to detect small shaft motions without physical contact, providing accurate observations for rotor dynamics analysis on small-diameter shafts or in tight counterbores. System setup requires gap voltage validation across the Proximitor terminals under non-rotating conditions. Adjusting probe insertion depth to achieve a baseline target of -10 VDC places the sensor output in the center of its linear range. Focused coil geometry provides cross-talk suppression when multiple probes are installed in dense bearing configurations.

Frequently Asked Questions

Q: What structural benefit does the 9.9 in case length provide?

A: The extended 9.9 in threaded probe housing allows deep penetration through thick outer machine casings or deep mounting brackets where shorter probe bodies cannot reach the shaft surface.

Q: How does the ClickLoc connector maintain mechanical coupling under machine vibration?

A: The miniature coaxial ClickLoc connector features a positive latching snap lock mechanism that prevents accidental disconnection or signal chatter caused by structural vibration.

Field Installation Guidelines

Mechanical Mounting: Carefully thread the 3/8-24 UNF probe body into the internal mounting port from outside or inside the machine casing.
Gap Adjustments: Monitor the Proximitor Sensor DC gap voltage output with a digital multimeter and adjust the probe position until reaching -10 VDC.
Locking Assembly: Secure the outer lock nut against the mounting wall to hold the probe setting firmly against machinery vibration.
Connector Connection: Join the miniature coaxial ClickLoc connector to the extension cable until fully latched, ensuring the connection remains clean and protected from oil exposure.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.