330910-00-03-10-02-00 Bently Nevada Proximity Probes Datasheet

330910-00-03-10-02-00 3300 NSv Probe | Bently Nevada

330910-00-03-10-02-00 3300 NSv Probe | Bently Nevada

Availability: 10 left in stock

Configured for dynamic shaft vibration and axial position measurement in tight-clearance rotating machinery monitoring loops, the Bently Nevada 330910-00-03-10-02-00 (330910...

SKU: 330910-00-03-10-02-00

Manufacturer: Bently Nevada
Product No.: 330910-00-03-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for dynamic shaft vibration and axial position measurement in tight-clearance rotating machinery monitoring loops, the Bently Nevada 330910-00-03-10-02-00 (330910 Proximity Probe) provides direct physical/electrical execution. It generates a localized radio frequency field at the probe tip to detect shaft displacement, transmitting high-frequency voltage proportional signals through an armored coaxial cable to a downstream 3300 NSv Proximitor sensor.

Suffix Breakdown & Model Matrix

Option Code	Specification Parameter	Value / Description
330910	Base Model	3300 NSv Probe, M10 x 1 Thread, with Armor
-00	Unthreaded Length Option	00 mm
-03	Overall Case Length Option	30 mm
-10	Total Length Option	1.0 metre (39 in)
-02	Connector and Cable-Type Option	Miniature coaxial ClickLoc connector, standard cable
-00	Agency Approval Option	Not required

Hardware Specifications

Parameter	Specification
Model	330910-00-03-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	Approx 0.14 kg (Shipping Weight 1.5 kg)
Dimensions	M10 x 1 thread, 30 mm case length, 1.0 m cable
Operating Temp	-51 deg C to +177 deg C (-60 deg F to +350 deg F)
Power Consumption	Passive transducer (driven by external Proximitor driver circuit)
Thread Type	Metric M10 x 1 threads
Unthreaded Length	0 mm
Overall Case Length	30 mm
Total System Length	1.0 metre (39 in)
Cable Armor	Flexible stainless steel armor outer sleeve
Connector Type	Miniature coaxial ClickLoc connector
Agency Approval	Not required (Option 00)

Mechanical Monitoring & Eddy-Current Transducer Performance

The 330910-00-03-10-02-00 probe relies on specialized eddy-current probe scaling tuned specifically for narrow target side-clearance constraints where standard 8 mm probes experience sideview target interference. Installation requires gap voltage validation (-10 VDC targets) measured across the Proximitor signal conditioning terminals to ensure the tip is centered in its active linear voltage range. Proper radial and axial orientation prevents mutual inductive field distortion and provides cross-talk suppression when installed in close proximity to adjacent vibration sensors during severe rotor dynamics.

Frequently Asked Questions

Q: How is the -10.0 VDC gap voltage set during mechanical probe mounting?

A: Rotate the threaded M10 probe casing into the mounting fixture while reading the DC output voltage at the Proximitor test terminals until -10.0 VDC is reached, confirming mid-scale electrical placement.

Q: Can a 1.0 metre 3300 NSv probe connect directly to a 5.0 metre 3300 NSv Proximitor?

A: No, a 1.0 metre probe requires a matching 4.0 metre 3300 NSv extension cable to establish the mandatory 5.0 metre total system electrical length.

Field Installation Guidelines

Thread the M10 x 1 casing into the mounting bracket or bearing housing, torquing to specification without over-tightening to preserve internal coil geometry.
Inspect the miniature coaxial ClickLoc connector to confirm surfaces are free of oil, water, or particulate contaminants before mating.
Tighten the ClickLoc connector by hand until positive mechanical detent locking is felt; avoid using mechanical pliers or wrenches.
Secure the flexible stainless steel outer armor along the cable run to prevent abrasion against surrounding vibrating structural members.
Route the extension run in grounded, rigid metallic conduit separated from high-voltage motor wiring to isolate signal paths from severe electromagnetic interference.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.