330910-00-18-10-02-00 Bently Nevada Proximity Probe

330910-00-18-10-02-00 3300 NSv Proximity Probe | Bently Nevada

330910-00-18-10-02-00 3300 NSv Proximity Probe | Bently Nevada

Availability: 10 left in stock

Configured for high-precision displacement and vibration monitoring in compact machinery spaces, the Bently Nevada 330910-00-18-10-02-00 (3300 NSv Proximity Probe) provides...

SKU: 330910-00-18-10-02-00

Manufacturer: Bently Nevada
Product No.: 330910-00-18-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 150g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for high-precision displacement and vibration monitoring in compact machinery spaces, the Bently Nevada 330910-00-18-10-02-00 (3300 NSv Proximity Probe) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

The part number 330910-00-18-10-02-00 defines the specific mechanical and electrical options for the 3300 NSv probe body, cable length, termination, and certifications:

330910: Base Model for 3300 NSv Proximity Probe (M10x1 thread with armor)
00: Unthreaded Length option - 0 mm
18: Case Length option - 180 mm overall case length
10: Total Length option - 1.0 meter (39 in)
02: Connector Option - Standard cable with miniature coaxial ClickLoc connector
00: Agency Approval Option - No approvals required

Hardware Specifications

Parameter	Specification
Model	330910-00-18-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.15 kg
Dimensions	M10x1 thread with armor, 0 mm unthreaded length, 180 mm case length
Operating Temp	-51 to 177 deg C
Power Consumption	Passive transducer element powered by connected Proximitor loop
Thread Type	M10x1 thread with protective armor
Target Calibration	Factory-calibrated to AISI 4140 steel
Total Cable Length	1.0 meter (39 in)
Connector Type	Miniature coaxial ClickLoc connector
Agency Approval	Option 00 (No approvals required)

Rotor Dynamics & Gap Voltage Validation

The 3300 NSv proximity transducer system utilizes high-frequency eddy-current probe scaling to measure target displacement without mechanical shaft contact. Engineered for tight side-clearance installations on small shafts, the narrow field probe geometry provides focused RF energy to eliminate counterbore side-view interference. During field commissioning and rotor dynamics verification, gap voltage validation requires setting the static physical clearance between the probe tip and target until a baseline target of -10 VDC is observed across the Proximitor output terminals, ensuring linear sensitivity across the dynamic displacement range.

Frequently Asked Questions

Q: What target material is pre-calibrated for the 3300 NSv proximity probe at the factory?

A: The probe system is factory-calibrated to AISI 4140 steel targets. Calibration for alternative target alloys is available upon request.

Q: Is silicone tape recommended for sealing ClickLoc connectors in turbine oil environments?

A: Silicone tape is provided as a general connector protection alternative, but it is not recommended for environments exposed to turbine oil, where dedicated connector protectors should be used instead.

Field Installation Guidelines

Mechanical Mounting: Thread the M10x1 armored probe into the mounting bracket or machine casing, taking care to avoid tip impact with the target surface.
Gap Voltage Setting: Connect a digital multimeter across the Proximitor Sensor DC terminals and adjust probe positioning until reaching the standard -10 VDC gap target.
Lock Nut Assembly: Torque the external lock nut against the mounting face to firmly secure the probe case against operational machine vibration.
Connector Mating: Fully latch the miniature coaxial ClickLoc connector to the extension cable and install protective connector sleeves to prevent fluid ingress.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.