The Bently Nevada 330930-060-00-05, also cataloged as the 3300 XL Standard Extension Cable, operates as a dedicated hardware component for high-frequency signal transmission between proximity probes and Proximitor sensors within 3300 XL Transducer System networks.
Suffix Breakdown & Model Matrix
The suffix breakdown for part number 330930-060-00-05 is structured as follows:
- 330930: Base Model designation for 3300 XL Standard Extension Cable
- 060: Cable Length Option - 6.0 meters (19.7 feet)
- 00: Connector and Cable Option - Standard cable without stainless steel armor
- 05: Agency Approval Option - Multiple approvals (CSA, ATEX, IECEx)
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330930-060-00-05 |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | 0.27 kg (Net), 1.5 kg (Shipping) |
| Dimensions | 6.0 meters (19.7 feet) physical length |
| Operating Temp | -51 to 177 deg C (-60 to 350 deg F) |
| Power Consumption | Passive physical conductor (zero power dissipation) |
| Unit Cable Mass | 0.045 kg/m |
| Armoring Option | Option 00 (Without stainless steel armor) |
| Agency Approval | Option 05 (Multiple Approvals) |
Rotor Dynamics & Gap Voltage Validation
The 3300 XL extension cable transmits raw high-frequency radio-frequency signals across its coaxial structure to maintain matched impedance and loop capacitance. Preserving exact total system cable length is necessary for accurate eddy-current probe scaling and rotor dynamics monitoring. Field commissioning requires executing gap voltage validation across the Proximitor output terminals, adjusting physical probe standoff distance until establishing a nominal baseline target of -10 VDC under non-rotating shaft conditions.
Frequently Asked Questions
Q: How does installing an incorrect cable length affect the Proximitor calibration?
A: The Proximitor sensor is calibrated to the combined capacitance of a specific total loop length. Using an unapproved cable length shifts system electrical tuning, degrading overall linear measurement accuracy.
Q: What precautions should be observed for unarmored extension cable installations?
A: Unarmored (Option 00) cables must be routed inside metal conduits or covered cable trays to protect the outer insulation against sharp bends, pinching, and mechanical impact.
Field Installation Guidelines
- Conduit Separation: Route the extension cable through grounded metallic conduit, keeping physical separation from AC motor cables to suppress induced electrical noise.
- Connector Mating: Inspect miniature coaxial ClickLoc connectors prior to mating. Align keyways, push, and twist until fully seated to establish positive mechanical latching.
- Minimum Bend Radius: Respect minimum allowable bend radius limits during installation to prevent deformation of the coaxial dielectric layer.
- Shield Isolation: Maintain overall cable shielding continuity along the run, ensuring single-point termination at the monitoring cabinet ground bar to mitigate ground loop currents.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
330930-045-03-CN Bently Nevada 3300 NSv Extension Cable
$99.00
$199.00
Bently Nevada 330930-045-00-CN 3300 NSv Extension Cable
$99.00
$199.00
330930-040-02-00 3300 XL Extension Cable | Bently Nevada
$99.00
$199.00
Bently Nevada 330910-07-23-10-02-00 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330910-00-05-10-02-00 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330909-00-60-10-02-00 3300 NSv Proximity Probe
$99.00
$199.00
330905-12-22-05-02-05 Bently Nevada 3300 NSv Proximity Probe
$99.00
$199.00
Bently Nevada 330905-07-17-05-02-05 3300 NSv Proximity Probe
$99.00
$199.00
330904-08-15-10-02-05 Bently Nevada 3300 XL Proximity Probes
$99.00
$199.00
Bently Nevada 330877-080-37-00 3300 XL 50 mm Extension Cable
$99.00
$199.00
Bently Nevada 330854-080-24-CN 3300 XL 25 mm Extension Cable
$99.00
$199.00
330854-040-24-CN Bently Nevada 3300 XL 25 mm Extension Cable
$99.00
$199.00
Bently Nevada 330854-040-24-05 3300 XL 25 mm Extension Cable
$99.00
$199.00
330854-040-24-00 Bently Nevada 3300 XL 25 mm Extension Cable
$99.00
$199.00
Guide
Translation missing: en.general.search.loading