Bently Nevada 3500/05-02-05-00-00-00 PLC Chassis Rack

3500/05 Bently Nevada 3500 Series Rack Datasheet & Technical Manual

3500/05 Bently Nevada 3500 Series Rack Datasheet & Technical Manual

Availability: 10 left in stock

Bently Nevada 3500/05-02-05-00-00-00 System Rack The Bently Nevada 3500/05-02-05-00-00-00, also cataloged as the 3500/05 12-Inch Mini-Rack, operates as a dedicated...

SKU: 3500/05-02-05-00-00-00

Manufacturer: Bently Nevada
Product No.: 3500/05-02-05-00-00-00
Product Type: System Racks
Product Origin: USA
Payment:T/T, Western Union
Weight: 6000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Bently Nevada 3500/05-02-05-00-00-00 System Rack

The Bently Nevada 3500/05-02-05-00-00-00, also cataloged as the 3500/05 12-Inch Mini-Rack, operates as a dedicated hardware component for machinery protection instrumentation hosting within TSI platforms. The unit establishes the physical structural alignment, backplane data communication paths, and primary power distribution lines across a 7-slot modular layout.

Suffix Breakdown & Model Matrix

Suffix / Identifier	Code	Description
Base Model	3500/05	Machinery Protection System Rack chassis
Mounting Option	-02	Rack Mount (12-inch mini-rack configuration)
Agency Approval	-05	No regulatory agency approvals specified
Reserved Options	-00-00-00	Standard factory build parameters

Hardware Specifications

Parameter	Specification
Model	3500/05-02-05-00-00-00
Brand	Bently Nevada
Origin	USA
Weight	6.0 kg (13.2 lbs)
Dimensions	266 mm x 304.8 mm (10.47 in x 12.00 in)
Operating Temp	-30 to +65 deg C
Power Consumption	Passive chassis backplane (Distribution handled via power supply module)
Total Slot Capacity	7 physical slots (1 Power Supply, 1 RIM, 5 Monitoring I/O slots)
Chassis Material	Heavy-duty industrial aluminum and steel alloy
Relative Humidity	95% non-condensing
Mounting Type	12-inch mini-rack panel mounting

Eddy-Current Probe Scaling & Rotor Dynamics

This hardware framework stabilizes data pathways required for eddy-current probe scaling calculations used in tracking proximity data. The structural design maintains rigid geometric parameters to neutralize external mechanical vibrations that could corrupt micro-volt sensor telemetry. High-speed backplane traces transmit raw continuous waveforms to monitor real-time rotor dynamics, including shaft centerline positioning and fluid-film bearing oil whirl. Internal trace spacing delivers built-in cross-talk suppression between adjacent high-frequency vibration cards, maintaining the gap voltage validation (-10 VDC targets) baseline necessary for accurate probe calibration.

Frequently Asked Questions

Q: Can standard 19-inch Bently Nevada 3500 monitor modules fit into this mini-rack?

A: Yes. The 3500/05 mini-rack uses the exact same physical slot height, pitch, and backplane connector pinout configuration as the standard 19-inch rack. It is limited only by horizontal slot density, offering 5 monitoring slots instead of 14.

Q: Can this chassis support dual-redundant power supply modules?

A: No. The 12-inch mini-rack backplane structure is physically limited to a single power supply slot allocation. Redundant power architectures require a full-sized 19-inch 3500/05 system rack layout.

Field Installation Guidelines

Install the 12-inch mini-rack chassis inside an industrial enclosure, securing all perimeter rack-mount fasteners to ensure a low-impedance ground connection to the cabinet frame.
Provide continuous physical separation inside wire ducts between low-level eddy-current transducer lines and high-voltage AC electrical distribution runs.
Verify that total power requirements for the installed modules do not exceed the nominal capacity rating of the single 3500 power supply assembly.
Maintain clean air boundary paths above and below the card cage structure to prevent localized heat build-up from drifting above the +65 deg C threshold.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.