The Bently Nevada 991-06-50-01-CN serves as the primary 991 Thrust Transmitter utilized to execute axial shaft displacement measurement across machinery protection platforms.
Suffix Breakdown & Model Matrix
| Option Code | Option Description | Technical Definition |
|---|---|---|
| 991 | Base Model | Thrust Transmitter |
| -06 | Full-scale Option | 0.6 - 0 - 0.6 mm measurement range |
| -50 | System Length Option | 5.0 metres (16.4 feet) total system length calibration |
| -01 | Mounting Option | 35 mm DIN-rail clips installed |
| -CN | Agency Approval Option | ATEX/IECEx and Chinese NEPSI hazardous area marking |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 991-06-50-01-CN |
| Brand | Bently Nevada |
| Origin | USA |
| Product Type | Thrust Transmitters |
| Measurement Parameter | Axial shaft displacement (thrust) |
| Full-Scale Range | 0.6 - 0 - 0.6 mm |
| System Length | 5.0 metres (16.4 feet) |
| Output Signal | Proportional 4-20 mA loop current |
| Mounting Interface | 35 mm DIN-rail clips |
| Hazardous Area Approvals | ATEX/IECEx and Chinese NEPSI (-CN option) |
| Power Consumption | Loop-powered via 24 VDC field circuit |
Eddy-Current Probe Scaling & Gap Voltage Validation (-10 VDC Targets)
The 991 transmitter processes input signals from non-contacting eddy-current proximity probes across a calibrated 5.0-metre system length. Commissioning requires physical gap voltage validation across raw probe output terminals to set the nominal baseline bias to -10 VDC when the machine rotor rests at mechanical mid-position. Precision eddy-current probe scaling translates mechanical shaft displacement into a proportional 4-20 mA current loop output across the 0.6 - 0 - 0.6 mm physical span.
Frequently Asked Questions
Q: How is operating power supplied to the 991 transmitter terminals?
A: Operating power is supplied directly through the 2-wire 4-20 mA current loop interface from the host control system or monitoring cabinet.
Q: What certification markings are provided under the -CN option code?
A: The -CN suffix indicates compliance with hazardous area certification standards, providing ATEX, IECEx, and Chinese NEPSI explosion-proof and intrinsic safety approvals.
Q: Can the 5.0-metre system length option be modified in the field using non-calibrated extension cables?
A: No, the total system length of 5.0 metres is factory-calibrated to match specific transducer coil inductance and cable capacitance; alter cable length disrupts output scaling.
Field Installation Guidelines
- Mount the transmitter module securely onto a standard 35 mm DIN rail inside an enclosure rated for the local hazardous area classification.
- Connect the matching 5.0-metre proximity probe extension cable coaxial connector to the transmitter input terminal, ensuring a clean and finger-tight joint.
- Validate static DC gap voltage using a multimeter across raw signal test terminals, adjusting mechanical probe depth until a target of -10 VDC is established.
- Connect 2-wire shielded twisted-pair cabling to the 4-20 mA output terminals according to intrinsically safe or explosion-proof wiring diagrams.
- Ground the field cable shield at a single point on the cabinet earthing bus bar to suppress electromagnetic interference and prevent ground loop noise.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
Bently Nevada 330730-080-12-CN 3300 XL 11 mm Extension Cable
$99.00
$199.00
Bently Nevada 3300/20-01-01-02-01-00 Dual Thrust Monitor
$50.00
$100.00
Bently Nevada 3500/20 Rack Interface Module
$100.00
$120.00
Bently Nevada 133835-01 3500/60 ISO TC Temperature I/O Module
$100.00
$120.00
Bently Nevada 129478-01 High Voltage DC Power Input Module
$80.00
$120.00
Bently Nevada 136188-01 Communication Gateway I/O Module
$100.00
$120.00
Bently Nevada 991-01-XX-01-00 Vibration Transmitter
$50.00
$100.00
Bently Nevada 125760-01 Data Manager I/O Module
$80.00
$120.00
Bently Nevada 125720-02 4-Channel Relay Output Module
$80.00
$120.00
Bently Nevada 135489-04 Proximitor/Seismic I/O Module
$100.00
$120.00
Bently Nevada 3500/61 163179-02 Temperature Monitor Module
$80.00
$120.00
Bently Nevada 133388-02 3500/50 Tachometer Module
$100.00
$120.00
Bently Nevada 3500/25 125792-01 Enhanced Keyphasor Module
$80.00
$120.00
Bently Nevada 3500/25 149369-01 Enhanced Keyphasor Module
$80.00
$120.00
Bently Nevada 3500/32M 149986-02 4-Channel Relay Module
$100.00
$120.00
Bently Nevada 126648-01 Keyphasor I/O Module
$80.00
$120.00
Bently Nevada 133819-01 RTD/TC Temperature I/O Module
$100.00
$120.00
Bently Nevada 86497-01-02-02-00 Interface Module
$99.00
$199.00
Bently Nevada 3300/03-02-01 System Monitor Module
$50.00
$100.00
Bently Nevada 16710-82 Interconnect Cable
$99.00
$199.00
Bently Nevada 990-04-70-01-00 990 Vibration Transmitter
$99.00
$199.00
Bently Nevada 990-04-70-02-00 Vibration Transmitter
$99.00
$199.00
Bently Nevada 125972-02 3500/42 Proximitor/Seismic Monitor
$80.00
$120.00
Guide
Translation missing: en.general.search.loading