The Bently Nevada 991-25-50-01-00, also cataloged as the 991 Thrust Transmitter, operates as a dedicated hardware component for axial shaft displacement signal conditioning within machinery protection systems.
Suffix Breakdown & Model Matrix
| Option Code | Option Description | Technical Definition |
|---|---|---|
| 991 | Base Model | Thrust Transmitter |
| -25 | Full-scale Option | 25-0-25 mils (+/-25 mils) full-scale axial displacement range |
| -50 | System Length Option | 5.0 metres (16.4 feet) calibrated system length |
| -01 | Mounting Option | 35 mm DIN-rail clips installed |
| -00 | Agency Approval Option | Not required (No hazardous area approvals) |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 991-25-50-01-00 |
| Brand | Bently Nevada |
| Origin | USA |
| Product Type | Thrust Transmitters |
| Measurement Type | Axial shaft displacement (thrust position) |
| Full-Scale Range | 25-0-25 mils (+/-25 mils) |
| System Length | 5.0 metres (16.4 feet) |
| Output Signal | Proportional 4-20 mA loop current |
| Mounting Interface | 35 mm DIN-rail clips |
| Agency Approvals | Not required (-00 option) |
| Power Consumption | Loop-powered via 2-wire 4-20 mA current loop |
Eddy-Current Probe Scaling & Gap Voltage Validation (-10 VDC Targets)
The transmitter conditions high-frequency RF excitation signals driven to non-contacting eddy-current proximity probes across a calibrated 5.0-metre system length. Commissioning requires physical gap voltage validation across test terminal connections to verify the static baseline target of -10 VDC when the machine shaft rests at mechanical zero. Precision eddy-current probe scaling translates physical displacement variations into a proportional 4-20 mA current output across the 25-0-25 mils linear measurement span.
Frequently Asked Questions
Q: How is primary operating power delivered to the 991-25-50-01-00 module?
A: Power is supplied directly over the 2-wire 4-20 mA current loop interface connected to the host control system analog input channel.
Q: Can extension cables be lengthened or shortened in the field?
A: No, the 5.0-metre total system length option is factory-calibrated to specific probe inductance and cable capacitance; modifying cable lengths alters system frequency response and current loop accuracy.
Q: What mounting mechanism is supplied with the -01 option code?
A: Option -01 provides pre-installed mounting clips that secure the transmitter assembly directly onto standard 35 mm DIN rails.
Field Installation Guidelines
- Install the transmitter module onto an industrial 35 mm DIN rail inside a protective field enclosure using the pre-installed clips.
- Connect the 5.0-metre proximity probe extension cable coaxial fitting to the transmitter input jack, securing it hand-tight.
- Measure static DC bias voltage across raw probe test terminals using a digital multimeter, adjusting mechanical probe depth until a target reading of -10 VDC is obtained at mechanical mid-span.
- Route 2-wire shielded twisted-pair conductors from the output terminals to the host automation system current loop card.
- Connect the field wiring cable drain shield to a single earth ground bar inside the cabinet to prevent noise pickup and ground loop currents.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
Bently Nevada 330730-080-12-CN 3300 XL 11 mm Extension Cable
$99.00
$199.00
Bently Nevada 3300/20-01-01-02-01-00 Dual Thrust Monitor
$50.00
$100.00
Bently Nevada 3500/20 Rack Interface Module
$100.00
$120.00
Bently Nevada 133835-01 3500/60 ISO TC Temperature I/O Module
$100.00
$120.00
Bently Nevada 129478-01 High Voltage DC Power Input Module
$80.00
$120.00
Bently Nevada 136188-01 Communication Gateway I/O Module
$100.00
$120.00
Bently Nevada 991-01-XX-01-00 Vibration Transmitter
$50.00
$100.00
Bently Nevada 125760-01 Data Manager I/O Module
$80.00
$120.00
Bently Nevada 125720-02 4-Channel Relay Output Module
$80.00
$120.00
Bently Nevada 135489-04 Proximitor/Seismic I/O Module
$100.00
$120.00
Bently Nevada 3500/61 163179-02 Temperature Monitor Module
$80.00
$120.00
Bently Nevada 133388-02 3500/50 Tachometer Module
$100.00
$120.00
Bently Nevada 3500/25 125792-01 Enhanced Keyphasor Module
$80.00
$120.00
Bently Nevada 3500/25 149369-01 Enhanced Keyphasor Module
$80.00
$120.00
Bently Nevada 3500/32M 149986-02 4-Channel Relay Module
$100.00
$120.00
Bently Nevada 126648-01 Keyphasor I/O Module
$80.00
$120.00
Bently Nevada 133819-01 RTD/TC Temperature I/O Module
$100.00
$120.00
Bently Nevada 86497-01-02-02-00 Interface Module
$99.00
$199.00
Bently Nevada 3300/03-02-01 System Monitor Module
$50.00
$100.00
Bently Nevada 16710-82 Interconnect Cable
$99.00
$199.00
Bently Nevada 990-04-70-01-00 990 Vibration Transmitter
$99.00
$199.00
Bently Nevada 990-04-70-02-00 Vibration Transmitter
$99.00
$199.00
Bently Nevada 125972-02 3500/42 Proximitor/Seismic Monitor
$80.00
$120.00
Guide
Translation missing: en.general.search.loading