Email: spareoil.com@industriaxplc.com
The ABB DSQC652 (3HAC025917-001) is a dedicated digital I/O unit engineered for integration within ABB robotic systems. This module provides reliable signal processing for automation environments, facilitating efficient communication between the robot controller and peripheral equipment.
Features
- 16 digital input channels for high-density signal monitoring.
- Standardized 24 V DC operation suitable for industrial control logic.
- Rapid response times with a delay of ≤0.5 ms to ensure precise timing.
- Low power dissipation design, rated at 150 mW per channel.
- Robust construction designed for standard industrial operating temperature ranges.
Applications
This I/O unit is primarily utilized in ABB robot controller cabinets to expand system input capabilities. It is suitable for interfacing with sensors, limit switches, and other binary signal devices required for complex robotic workcells and automated production lines.
Technical Specifications
| Model | DSQC652 (3HAC025917-001/00) |
| Input Channels | 16 Digital Inputs |
| Rated Voltage | 24 V DC |
| Input Voltage Range | 15–35 V |
| Input Current | ~5 mA (at rated voltage) |
| Response Delay | ≤0.5 ms |
| Leakage Current | ≤0.1 mA |
| Operating Temperature | -10 degC to +55 degC |
| Humidity | 5%–95% (non-condensing) |
Installation Guidelines
- Ensure the robot controller is fully powered down before inserting or removing the DSQC652 unit to prevent electrical damage.
- Verify that all field wiring is properly secured and follows the specific pinout requirements for the robot controller backplane.
- Use shielded cables for digital signals to minimize electromagnetic interference (EMI) in high-noise industrial environments.
- Maintain adequate ventilation within the controller cabinet to ensure the ambient temperature stays within the specified -10 degC to +55 degC range.
- Handle the module using proper ESD (Electrostatic Discharge) safety practices to protect internal circuitry.
FAQ
What is the primary function of the DSQC652?
The DSQC652 is a digital input module designed to expand the I/O capacity of ABB robot controllers, allowing the system to monitor up to 16 external digital signals.
Is this unit compatible with all ABB robots?
The DSQC652 is specific to certain ABB controller generations. Please verify your existing controller hardware and part number (3HAC025917-001) against your system documentation before installation.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
