SNT501-53 S1 Yokogawa CENTUM VP Datasheet & Technical Manual

AIP181-S2 Yokogawa CENTUM CS RIO Communication Module

AIP181-S2 Yokogawa CENTUM CS RIO Communication Module

Availability: 20 left in stock

Yokogawa AIP181-S2 Communication Module The Yokogawa AIP181-S2, also cataloged as the AIP181 Communication Module, operates as a dedicated hardware component...

SKU: AIP181

Manufacturer: Yokogawa
Product No.: AIP181
Product Type: Communication Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 160g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa AIP181-S2 Communication Module

The Yokogawa AIP181-S2, also cataloged as the AIP181 Communication Module, operates as a dedicated hardware component for deterministic bidirectional data exchange within CENTUM VP, CENTUM CS, and ProSafe-RS control platforms. Designed to interface Field Control Stations (FCS), Human Interface Stations (HIS), and remote I/O devices, this module executes high-speed data frame processing across the system bus. The unit incorporates galvanic isolation to mitigate noise interference and supports redundant bus configurations to maintain continuous communication integrity in critical process monitoring applications.

Suffix Breakdown & Model Matrix

Suffix / Option Code	Technical Specification / Configuration Details
AIP181	Base model designation for Electrical Transceiver Remote I/O (RIO) Communication Module
S2	Specific hardware revision level detailing modified signal transceiver characteristics and firmware configuration

Hardware Specifications

Parameter	Specification
Model	AIP181-S2
Brand	Yokogawa
Origin	Japan
Weight	0.16 kg (0.35 lbs)
Dimensions	140 x 45 x 100 mm
Operating Temp	0 to +55 deg C
Power Consumption	Low-power industrial design (24 VDC system supplied)
Module Type	Electrical Transceiver RIO Module
Data Interface	Real-time bidirectional system bus interface
System Compatibility	CENTUM VP, CENTUM CS, ProSafe-RS
Redundancy	Dual-redundant bus path support
Humidity	5 to 95% RH (non-condensing)

Process Control & DCS Instrumentation Characteristics

Operating within distributed control system (DCS) architectures, the AIP181-S2 provides deterministic data frame routing to prevent latency during process control loops. The module hardware maintains robust channel-to-channel isolation and immunity to electrical fast transients across communication lines. In redundant node topologies, the module continuously evaluates line status parameters and bus signal attenuation to facilitate seamless cutover between primary and secondary communication paths without dropping system data packets.

Frequently Asked Questions

Q: Does the AIP181-S2 communication module support hot-swapping during active system operation?

A: Hot-swapping depends on the specific rack enclosure and backplane power configuration. In redundant communication setups, removing the secondary module does not disrupt continuous system bus traffic on the primary line, provided the bus interface card locks properly into the rack.

Q: What power source supplies the AIP181-S2 module?

A: The module draws power directly from the system backplane power supply bus at 24 VDC, eliminating the need for external direct wiring connections to the front panel.

Q: How does the module maintain deterministic communication across the control network?

A: The hardware utilizes specialized internal transceiver circuitry paired with proprietary system bus timing logic, guaranteeing predictable message processing windows without packet collision or transmission delays.

Field Installation Guidelines

Power down the rack slot or confirm that the backplane supports active hot-swapping prior to inserting the module into the system enclosure.
Align the module card edges with the enclosure guide rails and slide the unit inward until the rear backplane connectors seat completely.
Tighten the top and bottom retaining screws to establish chassis ground continuity and prevent vibration-induced loosening.
Verify that all communication cabling runs through dedicated wireways separated from high-voltage power lines by at least 300 mm to suppress electro-magnetic interference.
Ensure ambient operating temperature inside the control cabinet remains between 0 and +55 deg C with adequate forced-air ventilation.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.