100% Genuine. 100,000+ Parts in Stock. Ready to Ship.

  • en

Product Overview

The Allen-Bradley 1769-IF4XOF2 serves as a high-efficiency interface for the CompactLogix and MicroLogix 1500 PLC platforms. This module integrates four analog input channels and two analog output channels into a single-slot width, maximizing backplane real estate. We supply this unit as 100% Brand New in original packaging, ensuring peak performance for your general-purpose process monitoring and basic control loops. It bridges the gap between field sensors and your controller by supporting both 0–10V DC and 0–20 mA signals.

Technical Specifications

The following table details the electrical and mechanical limits of the 1769-IF4XOF2:

Parameter Specification
Inputs 4 Single-Ended Channels
Outputs 2 Single-Ended Channels
Resolution 8-bit (Raw Binary)
Signal Ranges 0–10V DC, 0–20 mA (Input & Output)
Converter Type Successive Approximation (ADC)
Input Impedance 205 kΩ (Voltage) / 150 Ω (Current)
Output Load Range > 1 kΩ (Voltage) / 0–300 Ω (Current)
Backplane Current 120 mA @ 5.1V / 60 mA @ 24V
Operating Temp 0 to 60 °C (32 to 140 °F)
Dimensions 35 x 118 x 85 mm

Engineering Advantages

  • Small Footprint, High Density: By combining both inputs and outputs on a single module, engineers reduce the physical size of the PLC rack. This makes the 1769-IF4XOF2 perfect for small junction boxes and compact control panels.

  • Versatile Signal Compatibility: Each channel adapts to either voltage or current signals. This flexibility allows a single module to interface with a flow meter (mA) and a pressure transducer (V) simultaneously.

  • Cost-Efficient Scaling: The 8-bit resolution targets applications where high precision is secondary to budget and speed. It provides an economical solution for motor speed referencing and simple level sensing.

  • Seamless Backplane Integration: The module draws power directly from the 1769 backplane, eliminating the need for complex external power distribution for the module’s internal logic.

FAQs

  • Does the 1769-IF4XOF2 require a separate power supply?

    The module draws its operating power (120 mA at 5.1V and 60 mA at 24V) directly from the CompactLogix or MicroLogix backplane. However, you must ensure your field devices have adequate power according to their specific loop requirements.

  • Can I mix voltage and current signals on the same module?

    Yes. The 1769-IF4XOF2 supports both 0–10V DC and 0–20 mA signals. You configure the specific signal type via the wiring terminals and the controller software to match your field device.

  • What is the maximum distance for the analog signals?

    To maintain signal integrity and minimize EMI (Electromagnetic Interference), use shielded twisted-pair cable. Keep cable runs as short as possible and ensure the shield is grounded at only one end to prevent ground loops.

  • Is this module compatible with all CompactLogix controllers?

    It functions with any controller that supports the 1769 Compact I/O bus, including the CompactLogix 5370 L1, L2, and L3 series (within the limits of the specific controller's I/O bank capacity) and the MicroLogix 1500.

What's clients say about us

Translation missing: en.general.search.loading