AMN33 YOKOGAWA Nest for Communication Module

AMN33 YOKOGAWA CENTUM Nest for Communication Module PLC Module

AMN33 YOKOGAWA CENTUM Nest for Communication Module PLC Module

Availability: 10 left in stock

YOKOGAWA AMN33 Nest for Communication Module The YOKOGAWA AMN33, also cataloged as the AMN33 Nest for Communication Module, operates as...

SKU: AMN33

Manufacturer: Yokogawa
Product No.: AMN33
Product Type: Terminal I/O Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

YOKOGAWA AMN33 Nest for Communication Module

The YOKOGAWA AMN33, also cataloged as the AMN33 Nest for Communication Module, operates as a dedicated hardware component for signal termination and backplane interfacing within CENTUM series DCS platforms.

Hardware Specifications

Parameter	Specification
Model	AMN33
Brand	YOKOGAWA
Origin	Japan
Weight	2 kg
Dimensions	140 x 100 x 30 mm
Operating Temp	-20 deg C to +70 deg C
Power Consumption	< 10 W
Channel Capacity	32 I/O points
Power Supply	24 VDC (via backplane)
Protection Rating	IP20

DCS Process Control and Connectivity

The AMN33 functions as a high-density termination interface, designed to streamline signal routing within Yokogawa CENTUM CS 3000 and VP environments. By utilizing a connector-based backplane architecture, the unit facilitates direct 4-20 mA HART loop protocol compatibility when mapped to corresponding I/O cards. The design incorporates galvanic isolation principles through its physical separation of field wiring interfaces, effectively minimizing cross-channel interference and electromagnetic noise susceptibility. The module ensures consistent signal integrity by maintaining precise channel-to-channel isolation, which is critical for accurate process variable acquisition in large-scale control networks.

Frequently Asked Questions

Q: Does the AMN33 module support live module extraction or hot-swapping? A: No, the AMN33 does not support hot-swapping. Operators must perform a controlled system shutdown and disconnect the 24 VDC backplane supply prior to any maintenance or module replacement to prevent potential bus short-circuits.

Q: How should the shield of the field wiring be managed at the AMN33 interface? A: Field cable shields should be terminated to the designated functional earth (FE) bus bar within the cabinet. Ensure the shield termination point is as close to the entry of the AMN33 as possible to maximize noise immunity and maintain a low-impedance path to ground.

Field Installation Guidelines

Mounting Stability: Secure the AMN33 unit firmly onto the standard DIN-rail or chassis mounting plate. Ensure that the module is aligned squarely with the rack backplane to avoid pin misalignment during insertion.
Environmental Sealing: The unit is rated for IP20 operation. Install the module exclusively within a NEMA/IP-rated control cabinet to prevent ingress of conductive dust or moisture, which could degrade the connector pins.
Wiring Geometry: Route all field signal wires through dedicated cable ducts separate from high-voltage AC power feeders. Maintain a minimum distance of 100 mm from power lines to reduce inductive pickup on the 32-pin interface connections.
Grounding Protocol: Verify that the cabinet backplane is securely bonded to the main system ground. Use star-grounding techniques for all analog loops to prevent ground loops that could introduce errors in low-level signal readings.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.