ABB NTDI01 Digital I/O Termination Unit

Bently Nevada 145193-01 330180-X1-05 3300 XL Proximitor Sensor

Bently Nevada 145193-01 330180-X1-05 3300 XL Proximitor Sensor

Availability: 10 left in stock

Bently Nevada 145193-01 3300 XL 8mm Proximitor Sensor The Bently Nevada 145193-01, also cataloged as the 3300 XL 8mm Proximitor...

SKU: 145193-01

Manufacturer: Bently Nevada
Product No.: 145193-01
Product Type: Proximity Sensors
Product Origin: Switzerland
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Bently Nevada 145193-01 3300 XL 8mm Proximitor Sensor

The Bently Nevada 145193-01, also cataloged as the 3300 XL 8mm Proximitor Sensor (Model 330180-X1-05), operates as a dedicated hardware component for converting shaft gap distance into proportional analog voltage within 3500 Series Machinery Protection System platforms. It accepts input signals from 3300 XL 8mm proximity probes and conditions the dynamic raw voltage to output a calibrated linear signal of 7.87 V/mm (200 mV/mil). This module provides direct physical interface execution for tracking radial vibration, axial thrust position, and Keyphasor speed signals across rotating shaft machinery.

Suffix Breakdown & Model Matrix

The part number sequence defines the factory electrical calibration and system length parameters:

330180: Base model designation for the 3300 XL 8mm Proximitor Sensor series.
X1: High-accuracy performance specification option for target displacement tracking.
05: Factory calibration option for a 5.0-meter total system length (Probe + Extension Cable).
MOD 145193-01: Internal modification specification code ensuring standardized sensitivity for 8mm proximity probe systems.

Hardware Specifications

Parameter	Specification
Model	330180-X1-05 (MOD 145193-01)
Brand	Bently Nevada
Origin	USA
Weight	0.25 kg
Dimensions	81.3 mm x 61.2 mm x 63.5 mm
Operating Temp	-35 to +100 deg C
Power Consumption	Supply voltage requirement -17.5 VDC to -26 VDC
Output Sensitivity	7.87 V/mm (200 mV/mil)
Linear Range	2.0 mm (80 mils), starting at 0.25 mm (10 mils) gap
Frequency Response	0 Hz (DC) to 10 kHz
System Length	5.0 Meters total system length
Accuracy	+/-0.25% of full-scale range at room temperature
Compliance	API 670 machinery protection standard compliant

Rotor Dynamics and Gap Voltage Validation Parameters

The 330180-X1-05 MOD 145193-01 conditions high-frequency field signals generated by eddy-current field interaction with rotating targets. Accurate displacement tracking depends on standard eddy-current probe scaling tuned to AISI 4140 steel target material. During installation and routine maintenance, technicians execute gap voltage validation (-10 VDC targets corresponding to the center of the 2.0 mm linear range) to set the physical baseline before connecting the analog output to monitoring racks. The sensor housing incorporates cross-talk suppression and radio frequency interference (RFI) rejection circuitry to prevent signal distortion when routing cables near motor control equipment, maintaining phase timing accuracy for tracking rotor dynamics.

Frequently Asked Questions

Q: What occurs if field personnel pair the 145193-01 sensor with a 9.0-meter probe and cable assembly?

A: Pairing this unit with a 9.0-meter system length introduces major calibration errors and non-linear signal responses, as the internal LC oscillator tank circuit is tuned exclusively for 5.0-meter electrical lengths.

Q: Can the 145193-01 Proximitor mount directly on a standard 35mm DIN rail?

A: Yes, the housing includes integral mounting features that accept standard 35mm DIN-rail hardware or direct panel-mounting screws.

Q: How does a non-4140 steel shaft alloy affect the output signal of the 145193-01 sensor?

A: Target materials with different magnetic permeability alter the output sensitivity scale factor from the standard 200 mV/mil, requiring custom software scaling factors inside the 3500 monitoring system configuration.

Field Installation Guidelines

When installing the Bently Nevada 145193-01 3300 XL Proximitor Sensor in industrial enclosures, observe the following physical guidelines:

Mount the sensor chassis onto a grounded 35mm DIN rail or panel plate inside an IP65/NEMA 4X weather-proof enclosure.
Verify physical isolation between the sensor housing and adjacent metal components to prevent parasitic electrical grounding paths.
Connect the coaxial extension cable from the proximity probe, hand-tightening the ClickLoc connectors until the tactile click engages.
Insulate coaxial cable connector unions using silicone self-fusing tape or field connector protectors to block moisture entry.
Wire the terminal strip using three-conductor shielded cable (-24 VDC Power, Signal Output, Common Return), landing the shield at the single-point ground bus within the monitor rack panel.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.