288055-01 Bently Nevada Transient Data Module

Bently Nevada 288055-01 3500 Series Transient Data Module

Bently Nevada 288055-01 3500 Series Transient Data Module

Availability: 10 left in stock

Bently Nevada 288055-01 3500 Series Transient Data Interface I/O Module The Bently Nevada 288055-01, also cataloged as the 3500/22M Transient...

SKU: 288055-01

Manufacturer: Bently Nevada
Product No.: 288055-01
Product Type: Transient Data Interface Modules
Product Origin: Switzerland
Payment:T/T, Western Union
Weight: 5000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Bently Nevada 288055-01 3500 Series Transient Data Interface I/O Module

The Bently Nevada 288055-01, also cataloged as the 3500/22M Transient Data Interface I/O Module, operates as a dedicated hardware component for static and dynamic transient data acquisition within 3500 Machinery Protection System networks.

Hardware Specifications

Parameter	Specification
Model	288055-01
Brand	Bently Nevada
Origin	USA
Weight	5.0 kg
Dimensions	228 mm x 50 mm x 289 mm
Operating Temp	-30 deg C to +65 deg C
Power Consumption	Driven by 3500 rack backplane
Module Type	Standard Transient Data Interface (TDI) I/O
Interface Port	USB (front-panel diagnostic)
Supported Sensors	Proximitor Probes (5 mm, 8 mm, 11 mm), Velocity Sensors, Accelerometers
Input Signal Range	-24 VDC to +10 VDC
Data Acquisition	Static and Dynamic (Transient) Data Capture
Compliance	API 670 Standard

Machinery Monitoring & Eddy-Current Proximity Calibration

The module conditions analog inputs from 5 mm, 8 mm, and 11 mm proximity probes to maintain precise eddy-current probe scaling during high-speed transient events. Internal conditioning pathways execute continuous gap voltage validation (-10 VDC targets) to track center position offsets during shaft movement. Designed to process rapid variations in rotor dynamics during turbine startup and coast-down phases, the signal processing hardware incorporates active cross-talk suppression to preserve dynamic waveform purity across adjacent channels.

Frequently Asked Questions

Q: Is the 288055-01 module hot-swappable during powered rack operations?

A: Yes, the 3500 rack architecture supports hot-swapping of the I/O module without shutting down adjacent monitor cards, though active transient data streaming will pause during the exchange.

Q: What cable requirements apply to the local USB interface port?

A: The front panel utilizes an industrial-grade USB cable configured with braided shielding to maintain data throughput and prevent signal corruption under high electromagnetic interference conditions.

Q: How does the module process dynamic vibration data compared to standard gateway units?

A: Standard gateways transfer static alarm status bits, whereas the 288055-01 TDI captures full dynamic spectral waveforms and phase information required for transient Bode and Polar diagnostic plots.

Field Installation Guidelines

Mount the 288055-01 I/O module into the designated rear chassis slot of the 3500 rack, securing the captive retaining screws to complete chassis grounding. Route field transducer wiring through dedicated instrument trays to isolate signal paths from high-voltage AC lines. Connect transducer shielding strictly at the designated monitor chassis ground point to avoid circulating ground loops. When utilizing the front-panel USB port for field diagnostics, ensure the cable outer shield remains grounded and avoid routing near unshielded motor drives or high-frequency power conductors.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.