The Bently Nevada 330102-00-12-10-02-05 serves as the primary 330102 Proximity Probe utilized to execute vibration and displacement monitoring across 3300 XL Transducer System platforms. The unit relies on eddy-current generation to establish a continuous, non-contact electrical loop proportional to the physical distance between the probe face and the observed target area.
Suffix Breakdown & Model Matrix
- 330102: Core model prefix representing the 3300 XL 8 mm proximity probe configuration with 3/8-24 UNF thread and integrated armor.
- -00: Unthreaded length option, indicating 0.0 inches.
- -12: Overall case length option, indicating 1.2 inches.
- -10: Total length option, representing a 1.0 metre (3.3 feet) integral connection path.
- -02: Miniature coaxial ClickLoc connector with standard armored cable configuration.
- -05: Multiple agency approval option certifying compliance with CSA, ATEX, and IECEx requirements for hazardous locations.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330102-00-12-10-02-05 |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | 0.323 kg |
| Dimensions | 8 mm probe tip diameter, 3/8-24 UNF thread housing |
| Operating Temp | -51 deg C to +177 deg C |
| Power Consumption | Extracted directly from connected external Proximitor loop |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Cable Armor | Integrated flexible protective armor over standard cable |
| Connector Type | ClickLoc miniature coaxial connector |
Mechanical Monitoring & TSI Technical Attributes
The transducer element relies on high-frequency RF transmission to execute proper eddy-current probe scaling against standard steel targets. To achieve reliable output accuracy free from spatial distortion, a formal gap voltage validation must be completed upon physical installation, driving the static electrical baseline to a target value of -10 VDC within the center of the linear calibration envelope. This precise positioning ensures that the probe accurately registers mechanical deviations under high-velocity rotor dynamics. Furthermore, the armored cable boundary optimizes cross-talk suppression when multiple signal runs are localized within identical mechanical enclosures or wire conduits.
Frequently Asked Questions
Q: How does the integrated armor option affect the mechanical bend radius of the cable assembly?
A: The stainless steel armor increases mechanical protection but sets a strict minimum bend radius constraint of 25.4 mm (1.0 inch). Bending the armored layer past this threshold can permanently warp the interior coaxial cable, altering loop impedance.
Q: Is the polyphenylene sulfide (PPS) probe tip material compatible with corrosive chemical environments?
A: Yes, the PPS tip material exhibits chemical resistance across a broad range of industrial lubricants and solvents within the rated temperature scale of -51 deg C to +177 deg C.
Q: What action is required if the ClickLoc connector incurs fluid contamination before final assembly?
A: The connector must be flushed with an oil-free electrical contact cleaner and dried completely with compressed air. Residual moisture or oil at the coaxial junction changes the RF tuning properties of the loop.
Field Installation Guidelines
- Verify that the mounting bore contains matching 3/8-24 UNF threads and is clear of any metal debris or cutting chips.
- Screw the probe into the threaded mounting location by hand. Do not apply tools to the armored section or the probe tip area during insertion.
- Apply a digital voltmeter to the Proximitor Sensor's terminal block to read the DC gap voltage during physical adjustment.
- Rotate the probe body until the gap voltage validation registers the nominal baseline target of -10 VDC, confirming the probe is in its linear range.
- Secure the housing locknut firmly against the mounting plate to lock the position. Wrap the ClickLoc connector interface in self-fusing insulation tape to isolate the loop from structural grounding.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Bently Nevada 330101-00-12-05-02-05 Proximity Probe
$99.00
$199.00
330101-00-12-10-02-05 | Bently Nevada | Proximity Probe
$99.00
$199.00
330101-00-10-10-02-CN Bently Nevada Proximity Probe
$99.00
$199.00
330101-00-08-20-02-05 Extension Cable | Bently Nevada
$99.00
$199.00
Bently Nevada 330101-00-08-10-02-00 Proximity Probe
$99.00
$199.00
Bently Nevada 330101-00-08-05-02-00 Proximity Probe
$99.00
$199.00
Guide
Translation missing: en.general.search.loading