330101-00-32-10-02-05 Bently Nevada Proximity Transducer System

Bently Nevada 330101-00-32-10-02-05 3300 XL Proximity Transducer System

Bently Nevada 330101-00-32-10-02-05 3300 XL Proximity Transducer System

Availability: 10 left in stock

Configured for displacement measurement in rotating machinery, the Bently Nevada 330101-00-32-10-02-05 (330101 Proximity Transducer System) provides direct physical execution of...

SKU: 330101-00-32-10-02-05

Manufacturer: Bently Nevada
Product No.: 330101-00-32-10-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for displacement measurement in rotating machinery, the Bently Nevada 330101-00-32-10-02-05 (330101 Proximity Transducer System) provides direct physical execution of gap-to-voltage conversion for vibration and position monitoring.

Suffix Breakdown & Model Matrix

Option Component	Selection	Description
Model	330101	3300 XL 8 mm Proximity Probe
Unthreaded Length	00	0.0 in
Case Length	32	3.2 in
Total Length	10	1.0 m
Connector Type	02	Miniature coaxial ClickLoc
Agency Approval	05	CSA, ATEX, IECEx

Hardware Specifications

Parameter	Specification
Model	330101-00-32-10-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.323 kg
Dimensions	8 mm tip diameter, 3.2 in case length
Operating Temp	-51 deg C to +177 deg C
Power Consumption	Driven by 3300 XL Proximitor Sensor

Bently Nevada Mechanical Monitoring and TSI Characteristics

The 330101 system operates via eddy-current probe scaling, converting target displacement into a standard 7.87 V/mm (200 mV/mil) output. Accurate vibration monitoring requires rigorous gap voltage validation against -10 VDC targets at the center of the probe's linear range. To ensure high-fidelity rotor dynamics data, installers must implement cross-talk suppression by maintaining appropriate physical separation between adjacent probes. Shielded coaxial cabling must remain free of sharp kinks to preserve characteristic impedance and signal stability.

Frequently Asked Questions

Q: Does the 05 suffix permit operation in explosive atmospheres?

A: Yes, the 05 suffix indicates compliance with CSA, ATEX, and IECEx hazardous area standards. Ensure the system is interfaced with appropriate intrinsic safety barriers.

Q: Can the cable length be modified?

A: No. The 3300 XL system is factory-calibrated. Altering the cable length changes the system's electrical properties, resulting in measurement errors and loss of linear calibration.

Field Installation Guidelines

Ensure the mounting bracket is vibration-rigid to prevent mechanical resonance.
Mount the probe perpendicular to the target surface; misalignment exceeding 5 degrees compromises measurement linearity.
Validate the -10 VDC gap offset at the Proximitor sensor output during installation.
Apply standard torque to jam nuts to secure the probe position.
Route coaxial cables through grounded conduits to minimize electromagnetic interference.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.