330101-00-50-10-02-00 Bently Nevada Proximity Probes Datasheet & Technical Manual

Bently Nevada 330101-00-50-10-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330101-00-50-10-02-00 3300 XL 8 mm Proximity Probe

Availability: 10 left in stock

Configured for non-contact vibration and shaft position measurements in critical rotating machinery monitoring systems, the Bently Nevada 330101-00-50-10-02-00 (330101 Proximity...

SKU: 330101-00-50-10-02-00

Manufacturer: Bently Nevada
Product No.: 330101-00-50-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for non-contact vibration and shaft position measurements in critical rotating machinery monitoring systems, the Bently Nevada 330101-00-50-10-02-00 (330101 Proximity Probe) provides direct physical/electrical execution. It operates by generating an eddy-current field at the probe tip to measure dynamic and static distances between the target surface and the sensor, outputting a voltage signal proportional to the gap distance when paired with a compatible 3300 XL Proximitor Sensor.

Suffix Breakdown & Model Matrix

Option Code	Specification Parameter	Value / Description
330101	Base Model	3300 XL 8 mm Probe, 3/8-24 UNF thread, without armor
-00	Unthreaded Length Option	0.0 in
-50	Overall Case Length Option	5.0 in
-10	Total Length Option	1.0 metre (3.3 feet)
-02	Connector and Cable Type	Miniature coaxial ClickLoc connector, standard cable
-00	Agency Approval Option	Not required

Hardware Specifications

Parameter	Specification
Model	330101-00-50-10-02-00
Brand	Bently Nevada
Origin	USA
Probe Tip Diameter	8 mm
Thread Type	3/8-24 UNF thread
Unthreaded Length	0.0 in
Overall Case Length	5.0 in
Total System Length	1.0 metre (3.3 feet)
Connector Type	Miniature coaxial ClickLoc connector
Cable Type	Standard coaxial cable, without armor
Operating Temp	-51 deg C to +177 deg C (-60 deg F to +350 deg F)
Linear Range	2.0 mm (80 mils), typically from 0.25 mm to 2.25 mm (10 to 90 mils)
Scale Factor	7.87 V/mm (200 mV/mil) nominal when connected to matching Proximitor
Gap Voltage Target	-10.0 VDC nominal at center of linear range (~1.27 mm / 50 mils)
Agency Approval	Not required (Option 00)
Weight	Approx 0.3 kg

Mechanical Monitoring & Eddy-Current Transducer Performance

The 330101-00-50-10-02-00 proximity probe relies on precise eddy-current probe scaling to ensure linear voltage output over thermal and operational dynamic ranges. Proper field setup requires gap voltage validation (-10 VDC targets) measured at the Proximitor output terminals during mechanical center-point alignment. Sensor physical orientation and housing installations must strictly observe minimum shaft target material clearance and cross-talk suppression distances when mounting multiple probe tips in close radial proximity to prevent electromagnetic interaction between adjacent channels.

Frequently Asked Questions

Q: What is the recommended gap voltage verification procedure during installation?

A: Adjust the probe position using a mechanical micrometer or multimeter until the Proximitor output voltage reads -10.0 VDC, corresponding to the mechanical midpoint of the 80 mil linear range for AISI 4140 steel target material.

Q: How does the ClickLoc connector prevent accidental disconnections in high-vibration environments?

A: The ClickLoc miniature coaxial connector features a positive locking mechanism that physically latches upon full engagement, preventing rotational loosening caused by rotor dynamics and machine housing vibration.

Field Installation Guidelines

Ensure the mounting thread engagement utilizes proper torque limits for 3/8-24 UNF threads to prevent thread shearing or probe tip casing deformation.
Maintain clean, dry, and contaminant-free connector interfaces prior to mating ClickLoc connectors. Use protective connector covers during cable pull operations.
Observe minimum bend radius limits for the 1.0 metre coaxial cable (minimum 25.4 mm bend radius) to avoid internal conductor strain or signal impedance degradation.
Route probe cables through grounded metallic conduit, isolated from high-voltage AC power lines, to prevent cross-talk noise and electromagnetic interference.
Verify total system length matching (1.0 metre probe combined with appropriate extension cable and Proximitor sensor) to guarantee calibration accuracy.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.