330103-00-05-10-01-00 Bently Nevada Proximity Sensor

Bently Nevada 330103-00-05-10-01-00 3300 XL 8 mm Proximity Probes

Bently Nevada 330103-00-05-10-01-00 3300 XL 8 mm Proximity Probes

Availability: 10 left in stock

The Bently Nevada 330103-00-05-10-01-00 serves as the primary 330103 Proximity Sensors utilized to execute non-contact relative shaft position and dynamic...

SKU: 330103-00-05-10-01-00

Manufacturer: Bently Nevada
Product No.: 330103-00-05-10-01-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330103-00-05-10-01-00 serves as the primary 330103 Proximity Sensors utilized to execute non-contact relative shaft position and dynamic vibration monitoring across 3300 XL Transducer System platforms. It emits a high-frequency radio frequency field through its polyphenylene sulfide tip to detect physical displacement variations against rotating shafts.

Hardware Specifications

Parameter	Specification
Model	330103-00-05-10-01-00
Base Model	330103
Brand	Bently Nevada
Series	3300 XL 8 mm
Product Type	Proximity Sensors
Origin	USA
Case Geometry & Threading	3/8-24 UNF thread, 50 mm overall case length, 0 mm unthreaded length
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Differential Pressure Sealing	Integrated Viton O-ring sealing between probe tip and case
Total Cable Length	1.0 meter (3.3 feet)
Connector & Cable Type	Miniature coaxial ClickLoc connector with connector protector, standard cable
Agency Approvals	Unapproved / Not required (-00 option)
Operating Temp	-51 to +177 deg C (Standard probe operating envelope)
Power Consumption	Passive physical component (0 W)
Dimensions	Standard 8 mm probe tip diameter, 50 mm case length
Weight	0.323 kg (Net Weight) / 1.3 kg (Shipping Weight)

Eddy-Current Probe Scaling & Rotor Dynamics

The 330103-00-05-10-01-00 probe utilizes its 8 mm tip coil to maintain continuous eddy-current probe scaling at a linear 7.87 V/mm (200 mV/mil) sensitivity when tied to a matched extension cable and 3300 XL Proximitor sensor. Proper mechanical installation requires gap voltage validation targeting -10 VDC at nominal shaft center position. This setting maximizes linear dynamic range for peak-to-peak vibration excursions and promotes cross-talk suppression between closely spaced probes monitoring complex rotor dynamics.

Frequently Asked Questions

Q: What function does the integrated Viton O-ring provide in this probe assembly?

A: The Viton O-ring seals differential pressure between the probe tip and the stainless steel case body, preventing process fluid leakage through the internal probe casing.

Q: Why does option -01 include a factory connector protector?

A: The connector protector seals the miniature coaxial ClickLoc connection from oil, moisture, and debris, while isolating the coaxial shield from physical grounding against the machine chassis.

Q: Can this 1.0-meter probe cable (-10 option) connect directly to a 5.0-meter calibrated Proximitor sensor?

A: No, a 1.0-meter probe requires a 4.0-meter extension cable to complete the 5.0-meter total electrical system length calibrated for the Proximitor sensor.

Field Installation Guidelines

Clean and inspect the 3/8-24 UNF threaded port for thread debris prior to inserting the probe assembly.
Hand-thread the 50 mm probe into the housing bracket until the probe tip approaches the target shaft surface.
Wire the cable to the matching 3300 XL system and measure DC voltage output; adjust insertion depth until achieving the -10 VDC target gap voltage baseline.
Tighten the probe locknut against the mounting bracket face to the proper torque limit without twisting the lead cable.
Secure the ClickLoc coaxial connector to the extension cable and slide the connector protector over the joint to ensure electrical isolation from ground potential loops.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.