330103-00-09-10-02-CN Bently Nevada Series Datasheet & Technical Manual

Bently Nevada 330103-00-09-10-02-CN 3300 XL Proximity Probes

Bently Nevada 330103-00-09-10-02-CN 3300 XL Proximity Probes

Availability: 10 left in stock

The Bently Nevada 330103-00-09-10-02-CN, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for eddy-current displacement...

SKU: 330103-00-09-10-02-CN

Manufacturer: Bently Nevada
Product No.: 330103-00-09-10-02-CN
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330103-00-09-10-02-CN, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for eddy-current displacement and vibration sensing within 3300 XL Proximity Transducer System platforms.

Suffix Breakdown & Model Matrix

Option Slot	Configured Code	Technical Definition
Unthreaded Length Option	00	0 mm
Overall Case Length Option	09	90 mm
Total Length Option	10	1.0 meter (3.3 feet)
Connector and Cable-Type Option	02	Miniature coaxial ClickLoc connector, standard cable
Agency Approval Option	CN	Approvals country-specific

Hardware Specifications

Parameter	Specification
Model	330103-00-09-10-02-CN
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Unthreaded Length	0 mm
Overall Case Length	90 mm
Total Length	1.0 meter (3.3 feet)
Connector Type	Miniature coaxial ClickLoc connector
Cable Type	Standard cable
Operating Temp	-51 to +177 deg C
Power Consumption	Passive hardware element driven by Proximitor Sensor
Dimensions	M10 x 1 threaded body
Weight	0.35 kg

Gap Voltage Validation (-10 VDC targets)

The 3300 XL 8 mm proximity probe requires accurate mechanical gapping relative to the target shaft to execute continuous eddy-current conversion inside its calibrated linear range. During the mechanical installation phase, gap voltage validation must be executed via the Proximitor Sensor terminal test points, targeting a nominal value of -10 VDC targets. Achieving this specific voltage verifies that the probe tip resides at the precise geometric midpoint of the total linear displacement spectrum. Deviations from this target offset compromise the tracking accuracy of rotor dynamics and introduce data clipping under heavy dynamic shaft movement.

Frequently Asked Questions

Q: How is the gap voltage validation target verified during initial installation?

A: Connect a digital voltmeter to the proximal Proximitor Sensor "OUT" and "COM" terminals. Adjust the mechanical positioning of the probe body until the signal stabilizes at -10 VDC, indicating the correct physical gap distance has been achieved.

Q: Can the 1.0 meter integrated standard cable be cut or modified in length?

A: No. The total physical and electrical length of the probe cable constitutes a foundational element of the tuned RF circuit. Altering the cable length shifts system impedance, invalidating the calibration and destroying the accuracy of the probe scaling.

Field Installation Guidelines

Mechanical Torque Constraints: Secure the M10 x 1 threaded probe body into the mounting bracket using a calibrated torque tool. Do not exceed standard engineering torque limits to avoid mechanical distortion of the internal coil assembly.
Coaxial Connector Isolation: Ensure the miniature coaxial ClickLoc connection point is clean and free of oil, moisture, or particulate matter. Seal the junction completely using self-fusing electrical insulation tape or environmental boots.
Cable Bend Curvature Limits: Route the standard cable along the machine structure while respecting minimum bend radius regulations. Avoid sharp kinks or compression points that could degrade the internal RF shielding.
Target Track Surface Condition: Verify that the shaft target track area is mechanically smooth and compositionally uniform to minimize electrical runout signals from corrupting the dynamic vibration log.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.