330104-00-05-10-02-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-05-10-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-05-10-02-00 3300 XL 8 mm Proximity Probe

Availability: 10 left in stock

Configured for eddy-current displacement measurement in machinery protection systems, the Bently Nevada 330104-00-05-10-02-00 (330104 Proximity Probe) provides direct physical/electrical execution....

SKU: 330104-00-05-10-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-05-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for eddy-current displacement measurement in machinery protection systems, the Bently Nevada 330104-00-05-10-02-00 (330104 Proximity Probe) provides direct physical/electrical execution. The hardware operates by generating a high-frequency radio frequency (RF) field to detect static or dynamic distances between the probe tip and a conductive target material, outputting physical variations as an analog voltage shift back to a 3300 XL Proximitor Sensor.

Suffix Breakdown & Model Matrix

Suffix Code	Field Designation	Selected Option Specification
-00	Unthreaded Length	0 mm
-05	Overall Case Length	50 mm
-10	Total Length	1.0 metre (3.3 feet)
-02	Connector & Cable Type	Miniature coaxial ClickLoc connector, standard cable
-00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-05-10-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Thread Profile	M10 x 1 metric thread
Cable Armor	Integral flexible stainless steel armor
Total Length	1.0 metre
Connector Type	ClickLoc miniature coaxial
Operating Temp	-52 to +177 deg C
Shipping Weight	2.0 kg

Eddy-Current Probe Scaling & Calibration

The 3300 XL 8 mm probe operates on eddy-current scaling metrics tuned to AISI 4140 AISI steel targets unless calibrated otherwise. To maintain systematic loop verification, physical installation requires precise gap voltage validation. Field engineers must verify that the steady-state DC voltage reads a nominal target value (typically -10 VDC within the linear range) to center the probe within its calibrated 2.0 mm (80 mils) total linear range. Correct configuration eliminates cross-talk suppression failures when multiple probe tips are arrayed closely across rotor dynamics testing planes.

Frequently Asked Questions

Q: What is the fluid resistance specification for the probe tip assembly?

A: The tip is constructed of polyphenylene sulfide (PPS) and is fluid-sealed against compatible lubricants, oils, and chemical vapors at the machine case interface.

Q: Can this 1.0-metre probe be coupled directly to a monitor without an extension cable?

A: No. The total electrical loop length between the 3300 XL Proximitor Sensor and the probe must match the system design (typically 5.0 metres or 9.0 metres). A 1.0-metre probe requires a specific 4.0-metre or 8.0-metre extension cable to maintain loop impedance matching.

Field Installation Guidelines

Mechanical Torque Interlocks: When threading the M10 x 1 case option into the machine housing, do not exceed the maximum physical structural limit of 33.9 N-m (300 in-lb).
ClickLoc Interconnection Protection: Ensure the miniature coaxial connectors are clean and dry prior to deployment. Conductor interfaces must click together completely; use silicone or fluorosilicone self-fusing tape to seal the connection against environmental contaminants.
Minimum Separation to Prevent Cross-Talk: Maintain a minimum physical distance of at least 40 mm between adjacent probe tips to eliminate RF interference and cross-talk degradation within the target zone.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.