330130-045-02-00 Bently Nevada Extension Cable

Bently Nevada 330130-045-02-00 3300 XL Series Extension Cable

Bently Nevada 330130-045-02-00 3300 XL Series Extension Cable

Availability: 10 left in stock

The Bently Nevada 330130-045-02-00, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal...

SKU: 330130-045-02-00

Manufacturer: Bently Nevada
Product No.: 330130-045-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330130-045-02-00, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal transmission within 3300 XL Proximitor Sensor networks. It serves as the calibrated electrical pathway linking a proximity probe to a remote transducer module, ensuring continuous analog loop transmission without introducing uncompensated impedance mismatches or signal phase errors.

Suffix Breakdown & Model Matrix

330130 - Base Model: 3300 XL Standard Extension Cable
-045 - Cable Length Option: 4.5 metres (14.8 feet)
-02 - Connector Protector and Cable Option: Standard cable with connector protectors
-00 - Agency Approval Option: Not required

Hardware Specifications

Parameter	Specification
Model	330130-045-02-00
Brand	Bently Nevada
Origin	United States
Weight	0.25 kg nominal
Dimensions	4.5 m physical length (75 ohm coaxial geometry)
Operating Temp	-51 to +177 deg C
Power Consumption	0.0 W (Passive component)
Transducer System Matching	3300 XL 5 mm and 8 mm Proximity Transducers
Nominal Capacitance	69.9 pF/m (21.3 pF/ft)
Minimum Bend Radius	25.4 mm (1.0 in)

Eddy-Current Probe Scaling & Gap Voltage Validation

The physical geometry of the 330130-045-02-00 extension cable maintains tight impedance tolerances over its 4.5 m path to stabilize eddy-current probe scaling for proximity measurement systems. This coaxial engineering preserves the fidelity of high-frequency RF signals against industrial interference, allowing accurate gap voltage validation targeting standard -10 VDC operational baselines. Effective cross-talk suppression prevents voltage distortions when parallel cables are run within proximity of machinery rotor systems.

Frequently Asked Questions

Q: What is the technical purpose of the integrated connector protectors (-02 suffix) on this standard cable?

A: The connector protectors provide a physical environmental seal over the coaxial connections, preventing moisture ingress and eliminating accidental grounding loops caused by bare metal connectors touching structural conduits or machinery casings.

Q: Will trimming excess length off this 4.5 m cable during installation affect the transducer loop?

A: Yes. Trimming changes the absolute electrical length and total capacitance of the coaxial line. The remote Proximitor sensor is factory-calibrated for an exact total system length (typically 5.0 m or 9.0 m including probe); altering this length invalidates the linear scale factor.

Field Installation Guidelines

Verify the cumulative electrical length of the proximity probe and extension cable matches the specific configuration of the Proximitor sensor.
Do not exceed the minimum static bend radius of 25.4 mm during cable placement to prevent damage to the internal dielectric core.
Ensure the connector protectors are fully seated and locked over the coaxial joint to maintain physical and environmental isolation.
Route the non-armored extension cable within grounded metal conduits or dedicated low-voltage instrumentation channels to maintain maximum cross-talk suppression.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.