330905-00-15-05-02-00 Bently Nevada Probe

Bently Nevada 330905-00-15-05-02-00 3300 XL NSv Proximity Probe

Bently Nevada 330905-00-15-05-02-00 3300 XL NSv Proximity Probe

Availability: 10 left in stock

The Bently Nevada 330904-00-15-05-02-00, also cataloged as the 330905 Proximity Sensor, operates as a dedicated hardware component for non-contact displacement...

SKU: 330905-00-15-05-02-00

Manufacturer: Bently Nevada
Product No.: 330905-00-15-05-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 120g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330904-00-15-05-02-00, also cataloged as the 330905 Proximity Sensor, operates as a dedicated hardware component for non-contact displacement and vibration signal acquisition within 3300 XL NSv Proximity Transducer System networks. The unit converts target movement directly into proportional electrical signals for rotating equipment monitoring.

Suffix Breakdown & Model Matrix

Suffix Component	Option Code	Description
Unthreaded Length	00	0 mm
Overall Case Length	15	150 mm
Total Length	05	0.5 meter
Connector Type	02	Miniature coaxial ClickLoc connector (unarmored)
Agency Approval	00	Not required

Hardware Specifications

Parameter	Specification
Model	330905-00-15-05-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.12 kg (nominal)
Dimensions	150 mm Case Length, 0 mm unthreaded length
Operating Temp	-40 deg C to +82 deg C
Power Consumption	24 VDC external supply loop powered
Linear Range	0 to 1.5 mm (0 to 60 mils)
Frequency Response	2 Hz to 10 kHz
Signal Output	4-20 mA
Ingress Protection	IP67

Mechanical Monitoring and TSI Integration

The 3300 XL NSv proximity probe utilizes eddy-current technology to execute dynamic shaft position monitoring across compact rotating machinery. Correct signal interpretation relies on precise eddy-current probe scaling to ensure the voltage and current output remain strictly proportional to shaft displacement across the 0 to 1.5 mm measurement span.

System setup requires verification of the probe position via gap voltage validation (-10 VDC targets) through the transducer interface. Adjusting the physical probe distance to establish the -10 VDC set point aligns the sensor within the center of its linear response curve. Additionally, maintain spatial clearance around adjacent probes to ensure cross-talk suppression during multi-channel machinery protection monitoring.

Frequently Asked Questions

Q: Does the 330905 probe require direct physical contact with the rotating shaft?

A: No. The probe uses non-contact eddy-current sensing to detect displacement without physical contact, eliminating mechanical wear on the probe tip.

Q: Can this sensor be installed in wet or dusty field locations?

A: Yes. The probe body carries an IP67 environmental protection rating, allowing operation in demanding industrial conditions when cable connections are properly sealed.

Q: What power source is required to drive the 330905 proximity probe system?

A: The probe system operates on a standard 24 VDC power supply to provide loop excitation and field signal conditioning.

Field Installation Guidelines

Thread the probe casing into the target mounting port and torque to standard engineering limits, taking care not to twist or strain the coaxial lead wire.
Set the physical probe gap using feeler gauges or by performing gap voltage validation (-10 VDC targets) at the field terminal loop before locking jam nuts.
Keep the miniature coaxial ClickLoc connector free of oil, moisture, and particulate contamination prior to mating to ensure electrical continuity.
Route the sensor cable through dedicated grounded conduit, maintaining distance from high-voltage motor feeds to prevent electromagnetic interference.
Terminate cable shielding at the main monitoring rack ground bus only, leaving the field probe side ungrounded to prevent ground loops.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.