330910-07-23-10-02-00 Bently Nevada Proximity Probe

Bently Nevada 330910-07-23-10-02-00 3300 NSv Proximity Probe

Bently Nevada 330910-07-23-10-02-00 3300 NSv Proximity Probe

Availability: 10 left in stock

The Bently Nevada 330910-07-23-10-02-00, also cataloged as the 3300 NSv Proximity Probe, operates as a dedicated hardware component for Non-Contacting...

SKU: 330910-07-23-10-02-00

Manufacturer: Bently Nevada
Product No.: 330910-07-23-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 150g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330910-07-23-10-02-00, also cataloged as the 3300 NSv Proximity Probe, operates as a dedicated hardware component for Non-Contacting Shaft Vibration and Position Measurement within 3300 NSv Proximity Transducer System networks.

Hardware Specifications

Parameter	Specification
Model	330910-07-23-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.15 kg
Dimensions	M10x1 thread, 70 mm unthreaded length, 230 mm case length
Operating Temp	-52 to 177 deg C
Power Consumption	Passive transducer element driven by connected Proximitor loop
Target Resistance	4.2 ohm +/- 0.5 ohm
Case Material	Stainless steel
Cable Type	Coaxial, 1.0 meter (39 in)
Connector Type	Miniature coaxial ClickLoc connector
Agency Approval	Option 00 (None required)

Cross-Talk Suppression & Gap Voltage Validation

The 3300 NSv proximity probe utilizes high-frequency radio frequency energy to detect static distance and dynamic vibration of conductive target surfaces. Designed specifically for tight side-clearance target areas, the probe tip design minimizes side-view magnetic field dispersion, ensuring effective cross-talk suppression when probes are mounted in close proximity on small shafts or gear sets. Calibration and verification require performing gap voltage validation at the Proximitor Sensor terminals, adjusting the physical position until reaching a standard baseline target of -10 VDC under non-rotating shaft conditions.

Frequently Asked Questions

Q: What is the maximum tightening torque specified for mounting the stainless steel probe body?

A: The probe should be tightened by hand, with a strict maximum tightening torque limit of 0.56 N m to avoid damage to the threaded casing.

Q: What precautions should be taken regarding low temperature exposure?

A: Although the working and storage range spans from -52 to 177 deg C, prolonged exposure to cold temperatures below -34 deg C should be avoided to prevent stress on cable materials and potting compounds.

Q: What connector protection is supplied with the probe assembly?

A: The probe is shipped in original factory packaging and includes protective caps over the miniature coaxial ClickLoc connector to prevent contamination before field mating.

Field Installation Guidelines

Physical Thread Engagement: Thread the M10x1 stainless steel case into the tapped mounting port, ensuring thread depth does not exceed 15 mm.
Hand Tightening: Tighten the probe body by hand only. Do not exceed the maximum allowable torque specification of 0.56 N m.
Gap Voltage Calibration: Adjust axial positioning while reading the DC terminal output at the connected Proximitor until achieving the target -10 VDC gap setting.
Coaxial Connection: Remove the protective cap and connect the ClickLoc coaxial connector to the extension cable, verifying that the lock fully latches against vibration.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.