The Bently Nevada 330930-045-00-CN, also cataloged as the 3300 NSv Extension Cable, operates as a dedicated hardware component for high-frequency signal transmission between proximity probes and Proximitor sensors within 3300 NSv Proximity Transducer System networks.
The catalog options for the 330930-045-00-CN breakdown as follows:
| Parameter | Specification |
|---|---|
| Model | 330930-045-00-CN |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | 1.5 kg (Shipping weight) |
| Dimensions | 4.5 meters (14.8 feet) length |
| Operating Temp | -51 to 177 deg C (-60 to 350 deg F) |
| Power Consumption | Passive physical conductor (zero power dissipation) |
| Cable Material | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Center Conductor Resistance | 0.220 ohm/m (0.067 ohm/ft) |
| Shield Resistance | 0.066 ohm/m (0.020 ohm/ft) |
| Extension Cable Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Armor Option | Option 00 (Without stainless steel armor) |
| Agency Approval | Option CN (China specific approval) |
The 3300 NSv extension cable transfers high-frequency excitation signals between the eddy-current probe and the Proximitor sensor while maintaining strict resistance and capacitance matching (69.9 pF/m typical). Maintaining correct physical cable length is required to preserve linear eddy-current probe scaling across tight side-clearance target zones. During commissioning, gap voltage validation requires setting the static mechanical probe position until a baseline target of -10 VDC is observed across the Proximitor output terminals, establishing linear voltage response for dynamic shaft measurements.
Q: How does the electrical capacitance of the extension cable affect system performance?
A: The 3300 NSv Proximitor sensor is calibrated to the total capacitance of a specific loop length. Using an unapproved cable length alters circuit capacitance (69.9 pF/m nominal) and shifts probe sensitivity scaling.
Q: What insulation material is used on the 330930 extension cable?
A: The coaxial cable uses fluoroethylene propylene (FEP) insulation, which rates for continuous thermal stability across an operating range of -51 to 177 deg C.
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.