330930-060-01-CN Bently Nevada Extension Cable

Bently Nevada 330930-060-01-CN 3300 XL Standard Extension Cable

Bently Nevada 330930-060-01-CN 3300 XL Standard Extension Cable

Availability: 10 left in stock

The Bently Nevada 330930-060-01-CN, also cataloged as the 330930 Extension Cable, operates as a dedicated hardware component for high-frequency signal...

SKU: 330930-060-01-CN

Manufacturer: Bently Nevada
Product No.: 330930-060-01-CN
Product Type: Extension Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 330930-060-01-CN, also cataloged as the 330930 Extension Cable, operates as a dedicated hardware component for high-frequency signal transmission within 3300 XL Proximity Transducer Systems. It routes dynamic RF phase and amplitude signals between the proximity probe and the Proximitor sensor without signal degradation.

Suffix Breakdown & Model Matrix

Option Code	Designation	Parameter Value / Option Description
330930	Base Model	3300 XL Standard Extension Cable
-060	Cable Length Option	6.0 meters (19.7 feet)
-01	Connector & Cable Option	With stainless steel armor, with FEP jacket
-CN	Agency Approval Option	Country-specific approvals (China/Asia-Pacific regional compliance)

Hardware Specifications

Parameter	Specification
Model	330930-060-01-CN
Base Model	330930
Brand	Bently Nevada
Series	3300 XL
Product Type	Standard Extension Cable
Origin	USA
Cable Length	6.0 meters (19.7 feet)
Armor / Jacket Type	Stainless steel flexible armor with fluorinated ethylene propylene (FEP) outer jacket
Agency Approvals	Country-specific (CN option)
Calculated Net Weight	0.27 kg (0.045 kg/m)
Shipping Weight	1.5 kg
System Capacitance / Impedance	Matched to 3300 XL Proximitor Sensor and Probe input circuit specifications
Operating Temp Range	Standard 3300 XL field rating (-51 to +177 deg C for extended temperature environments)

Eddy-Current Probe Scaling & Signal Path Validation

The 330930 extension cable maintains tight tolerance control over internal core capacitance and inductance to ensure accurate eddy-current probe scaling across the transducer system. Impedance mismatching across extension cabling alters the RF carrier voltage supplied by the Proximitor sensor, directly affecting the 200 mV/mil (7.87 V/mm) or 100 mV/mil output scale factor. Precise line-length calibration verifies gap voltage validation targeting -10 VDC at nominal center-gap positions, preventing signal attenuation and cross-talk suppression issues in dense machinery monitoring racks monitoring rotor dynamics.

Frequently Asked Questions

Q: How does cable length selection affect overall 3300 XL proximity transducer system tuning?

A: The total system length (probe plus extension cable) must match the total system length specification of the 3300 XL Proximitor Sensor (typically 5.0 meters or 9.0 meters total). Installing a 6.0-meter extension cable requires pairing with a 1.0-meter or 3.0-meter probe, depending on the targeted 5-meter or 9-meter sensor calibration.

Q: What protection does the option -01 armor configuration provide in severe field environments?

A: The stainless steel flexible armor provides high mechanical crush resistance and tensile strength, while the outer FEP jacket seals the metallic armor against corrosive chemical exposure, moisture ingress, and abrasion.

Q: Why is proper connector tight-torque and insulation critical during installation?

A: Loose or contaminated miniature coaxial connectors introduce series resistance and capacitive degradation, shifting the baseline -10 VDC gap voltage reading and distorting high-frequency vibration signal transmission.

Field Installation Guidelines

Inspect the male and female miniature coaxial connectors for contamination, moisture, or physical pin deflection prior to mating. Clean with contact cleaner if necessary.
Hand-tighten the coaxial connectors, then apply finger-tight torque or use the manufacturer-recommended connector protector/wrench to secure the threaded connection without over-torquing.
Install silicone connector protectors or rubber boots over the mated junction to prevent moisture penetration and ground loops caused by the armor contacting structural steel.
Maintain a minimum bend radius of 25 mm (1.0 inch) for armored extension cabling during routing to avoid kinking the internal flexible stainless steel armor or damaging the internal coaxial core.
Secure the cable run along structural conduit trays using stainless steel cable ties. Do not crush the FEP outer jacket. Ensure the cable armor is isolated from ground except through the intended Proximitor housing ground connection point.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.