ATA4D-00 YOKOGAWA CENTUM VP Datasheet & Technical Manual

Communication Interface Module CENTUM VP Series | YOKOGAWA ATA4D-00

Communication Interface Module CENTUM VP Series | YOKOGAWA ATA4D-00

Availability: 99 left in stock

YOKOGAWA ATA4D-00 Communication Interface Module Configured for high-speed data exchange in CENTUM VP FIO subsystems, the YOKOGAWA ATA4D-00 S2 (ATA4D-00...

SKU: ATT4D-00 S2

Manufacturer: Yokogawa
Product No.: ATT4D-00 S2
Product Type: Communication Interface Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 600g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

YOKOGAWA ATA4D-00 Communication Interface Module

Configured for high-speed data exchange in CENTUM VP FIO subsystems, the YOKOGAWA ATA4D-00 S2 (ATA4D-00 S2 Communication Interface Module) provides the primary link between field control stations and external subsystems.

Hardware Specifications

Parameter	Specification
Model	ATA4D-00 S2
Brand	YOKOGAWA
Origin	USA
Weight	0.6 kg
Dimensions	15.2 cm x 7.6 cm x 25.4 cm
Operating Temp	0 to 50 deg C
Power Consumption	0.6 A at 24 V DC
Protocol Support	Vnet/IP, Subsystem Bus
Data Throughput	100 Mbps class

DCS Process Control and Network Connectivity

The ATA4D-00 module manages real-time traffic across the CENTUM VP control network, facilitating deterministic data throughput between controllers and connected process subsystems. The internal circuitry supports 4-20 mA HART loop protocol translation when interfacing with field-side converters, ensuring that analog process variables maintain their integrity throughout the conversion process. The hardware provides galvanic isolation on all communication ports to suppress electromagnetic interference and prevent ground-loop current paths. Additionally, the firmware supports dual-redundant pairing, which allows the system to switch to a standby interface module within milliseconds upon detecting a heartbeat loss or bus parity error, maintaining constant process visibility for operator stations.

Frequently Asked Questions

Q: Does the ATA4D-00 handle direct field I/O wiring like sensors or actuators?

A: No, this module functions exclusively as a communication interface bridge. It does not possess the circuitry required to process or drive raw analog or digital I/O signals directly.

Q: What is the fail-over latency when using a dual-redundant module configuration?

A: In a configured redundant pair, the system executes an automated switchover to the secondary module in under 50 ms upon fault detection, minimizing data acquisition gaps during controller transition.

Q: Can this module communicate with non-Yokogawa proprietary subsystems?

A: The module is optimized for Vnet/IP and standard Yokogawa subsystem bus protocols. Interfacing with third-party networks may require additional protocol converters or communication gateways.

Field Installation Guidelines

Install the ATA4D-00 within a grounded control cabinet, ensuring the mounting surface remains vibration-free and adheres to the specified 0 to 50 deg C operating window. Secure the module using the integrated DIN-rail or rack-mount hardware to guarantee stability during operation. When connecting communication cables, utilize shielded twisted-pair or fiber-optic media as dictated by the system bus topology. Terminate cable shields at the cabinet's instrument earth bar to reduce high-frequency noise injection. Finally, verify the 24 V DC input voltage at the power terminals before seating the module to avoid potential damage to the internal power supply regulators.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.