IP91A-A Yokogawa Centum XL Communication Module

Availability: 10 left in stock

Yokogawa IP91A-A Centum XL Communication Module Configured for high-speed network integration in industrial automation environments, the Yokogawa IP91A-A, also cataloged...

SKU: IP91-A

Manufacturer: Yokogawa
Product No.: IP91-A
Product Type: Communication Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 900g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa IP91A-A Centum XL Communication Module

Configured for high-speed network integration in industrial automation environments, the Yokogawa IP91A-A, also cataloged as the IP91-A Communication Module, provides direct physical/electrical execution to manage data transfers between distributed control architectures and external nodes. The hardware operates as a centralized bus interface component within Yokogawa Centum XL and micro XL platforms, executing multi-protocol serialization to route discrete and analog process variables without software-induced bottlenecks.

Hardware Specifications

Parameter	Specification
Model	IP91A-A
Brand	Yokogawa
Origin	USA
Weight	0.9 kg
Dimensions	25.4 cm x 5.1 cm x 38.1 cm
Operating Temp	-20 to 70 deg C
Power Consumption	Less than or equal to 15 W
Protocols Supported	Ethernet/IP, Modbus/TCP, Profinet, OPC-UA, MQTT, CANopen, Profibus, RS-232/RS-485
Data Transfer Rate	Up to 1 Gbps
Interface Type	RJ45 Ethernet, Physical Serial Ports
Power Supply	8-36 V DC (Typical 24 V DC)
Communication Standards	IEEE 802.3, IEC 61158
Enclosure Rating	IP67

Process Control & Network Topology Implementation

The module establishes a deterministic communication link utilizing concurrent fieldbus and industrial Ethernet topologies. To protect internal digital system logic from transient variations on long-distance copper links, the hardware integrates channel-to-channel isolation networks that block external voltage differentials. The communication processor systematically scans connected segments, executing protocol translations across Modbus/TCP, Profinet, and legacy RS-232/RS-485 interfaces natively. This native processing path guarantees stable frame validation and ensures that data exchange between the central processing unit backplane and remote field devices maintains synchronized timing loops under peak traffic conditions.

Frequently Asked Questions

Q: How does the module handle backplane current consumption when multiple communication ports operate at a full 1 Gbps data transfer rate?

A: The hardware incorporates independent internal switching regulators to distribute thermal dissipation. Under maximum data throughput utilizing all available physical links, power consumption stabilizes below 15 W, drawing current from the primary 24 V DC supply rails without exceeding backplane electrical load allowances.

Q: What actions occur during a sudden loss of network communication on an active RS-485 serial segment?

A: The module executes built-in diagnostic checks to detect termination faults or line breaks. Upon verifying a loss of signal, it sets a hardware error flag on the Centum XL system bus, forcing the specific channel data inputs to a fail-safe state while maintaining active processing on adjacent Ethernet segments.

Field Installation Guidelines

Physical Mounting Stability: Secure the module onto the dedicated panel enclosure layout using standard chassis mounting screws. Confirm that structural tolerances match the physical module dimensions of 25.4 cm x 5.1 cm x 38.1 cm to prevent physical stress on the backplane connectors.
Shielding and Grounding Procedures: Terminate all serial and Ethernet communication cable shields directly at the enclosure bulkhead grounding strip. Maintain low-impedance copper strap connections between the chassis frame and the master station instrument ground to prevent common-mode noise corruption.
Cable Routing Restrictions: Route all digital communication cables through separate wiring ducts isolated from high-voltage AC motor drives and three-phase power lines. Maintain a minimum physical separation distance of 30 cm to eliminate electromagnetic cross-talk along parallel conduit paths.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.