Series G PLC Wiring Assembly | Allen Bradley 1771-W

Availability: 20 left in stock

Product Overview The Allen Bradley 1771-W Series G Terminal Block (Field Wiring Arm) establishes secure electrical connections between field devices...

SKU: 1771-W

Manufacturer: Allen Bradley
Product No.: 1771-W
Product Type: PLC Terminal Blocks
Product Origin: USA
Payment:T/T, Western Union
Weight: 560g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The Allen Bradley 1771-W Series G Terminal Block (Field Wiring Arm) establishes secure electrical connections between field devices and standard 1771 digital I/O modules, such as the 1771-IB 8-point DC input module. This mechanical arm hinges directly onto the 1771 universal I/O chassis layout, allowing field wires to remain permanently connected during module replacement. It eliminates the need to tag and disconnect individual signal wires, maintaining circuit layout integrity and dramatically cutting system maintenance times.

We guarantee this product is 100% Brand New, original factory stock, and ready to optimize your legacy industrial control architectures.

Technical Specifications

Parameter	Specification
Product Type	Field Wiring Arm / Terminal Block
Series Designation	Series G
System Compatibility	Allen-Bradley PLC-5 1771 I/O Chassis
Target Module Pairing	1771-IB (8-Channel Digital DC Input Module) and equivalent 1771 cards
Supported Terminal Voltage	10 to 60 VDC (Matching 1771-IB category ratings)
Connection Density	Accommodates multi-point field wiring terminations
Terminal Connection Style	Heavy-duty industrial screw-clamp terminals
Wire Strip Length	Standard gauge industrial field wiring dimensions
Mechanical Interface	Pivoting chassis hinge with front-facing module lock

Engineering Advantages

Enables Hot-Swappable Maintenance: The pivoting mechanical design permits field technicians to swap out a faulty 1771-IB module without disconnecting a single field wire. The arm swings out of the way, the card slides out, a new card goes in, and the arm locks back into place—saving hours of rewiring labor and reducing wire placement errors to zero.
Streamlines High-Density Cabinet Layouts: The vertical layout compresses multiple terminal connection points into a narrow physical footprint. This configuration frees up internal panel space, allowing clean wire-duct routing inside congested electrical control enclosures.
Resists Severe Vibration and Shock: Heavy-duty screw-clamp terminal connections secure stranded or solid signal wires tightly. This robust mechanical grip prevents loose connections caused by harmonic vibrations near large industrial motors, pumps, and conveyor systems.
Protects Low-Voltage Signal Integrity: By providing clean mechanical termination surfaces, the Series G hardware minimizes contact resistance. This ensures reliable 10 to 27 VDC logic-level signal transmission from field sensors back to the 1771-IB backplane without voltage drops.

FAQs

Can I use the 1771-W Series G terminal block interchangeably with older Series revisions?

Yes. The Series G wiring arm maintains complete backward mechanical compatibility with standard 1771 I/O module slots and legacy field components. It slips directly into existing 1771 chassis hinges without requiring panel modifications.
Does this component include the plastic keying bands to prevent incorrect module insertion?

This terminal block interacts seamlessly with the standard plastic keying bands installed on the 1771 chassis backplane. Operators should always verify that the chassis slot keying matches the specific 1771-IB module assignment before pivoting the wiring arm into the locked position.
What is the best way to route heavy-gauge field wiring into the 1771-W terminal terminals?

Route field wires upwards through the lower cable clearance path of the wiring arm. Strip the wires according to manual guidelines, insert them into the screw clamps, and tighten to specification. Leave a slight service loop in the wire bundle to ensure the arm can pivot outward freely during future maintenance procedures.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.