T8480C ICS TRIPLEX Trusted Datasheet & Technical Manual

T8480C ICS TRIPLEX Trusted TMR Input Output Modules

T8480C ICS TRIPLEX Trusted TMR Input Output Modules

Availability: 20 left in stock

ICS TRIPLEX T8480C Trusted TMR Module The ICS TRIPLEX T8480C serves as the primary T8480C Trusted TMR Module utilized to...

SKU: T8480C

Manufacturer: ICS Triplex
Product No.: T8480C
Product Type: TMR Input Output Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

ICS TRIPLEX T8480C Trusted TMR Module

The ICS TRIPLEX T8480C serves as the primary T8480C Trusted TMR Module utilized to execute digital and analogue signal interface tasks across safety instrumented systems platforms. The unit processes active field circuitry loops, converting field transitions into redundant processing signals via the internal backplane architecture.

Hardware Specifications

Parameter	Specification
Model	T8480C
Brand	ICS TRIPLEX (Rockwell Automation)
Origin	United States
Weight	1.5 kg
Dimensions	190 mm x 130 mm x 35 mm
Operating Temp	-40 deg C to 70 deg C
Power Consumption	Maximum 5 W
Input Channel Option	32 channels (24 VDC input configuration)
Output Channel Option	24 isolated outputs (4-20 mA analogue configuration)
Output Accuracy	+/-0.1% of full scale
Isolation Voltage	2500 V between field wiring and logic circuits (field-to-logic)
Surge Protection	4 kV limits
Storage Temp	-55 deg C to 85 deg C
Humidity	5% to 95% RH, non-condensing

Triple Modular Redundancy Safety Control

The ICS TRIPLEX T8480C incorporates internal voting logic loops engineered for triple modular redundancy (TMR) 2oo3 architecture integration. The sub-module executes diagnostic line sweeps across all isolated channels to detect open circuit, short circuit, and out-of-range signal limits, forcing a fail-safe state execution upon detection of active loop degradation. The processing architecture relies on channel-to-channel galvanic isolation thresholds up to 2500 V to isolate external field line disturbances, preventing electrical faults from crossing over into parallel backplane processing channels.

Frequently Asked Questions

Q: Does the module tolerate live extraction and insertion during active plant operation?

A: Yes. The hardware accommodates hot-swappable replacement procedures, allowing an operator to exchange the sub-assembly inside a redundant slot without causing signal interruptions or safety function degradation.

Q: What mechanisms mitigate line noise and voltage transients within this hardware?

A: The input/output pathways incorporate dedicated noise suppression filters rated at 500 V/us alongside transient surge absorption circuits that withstand spike potentials up to 4 kV.

Q: How does the module handle output circuit errors in 4-20 mA configurations?

A: The module performs constant read-back current diagnostics to cross-reference the commanded field value against actual loop current, shifting to the designated safety state if a discrepancy occurs.

Field Installation Guidelines

Chassis Grounding Protocols: Secure all field cable shields directly to the low-impedance master instrument ground busbar. Do not share ground terminations or chain grounding terminals sequentially across multiple modules.
Backplane Connector Seating: Insert the module along the chassis guide tracks, pushing firmly until the rear pin header fully mates with the redundant backplane sockets, and secure the mechanical retaining fasteners.
Cable Routing Disconnects: Maintain a minimum clear physical separation between the low-voltage 4-20 mA / 24 VDC instrument loop lines and high-voltage power distribution wiring inside the panel wire ducts.
Thermal Boundary Management: Observe the operating limits of -40 deg C to 70 deg C by keeping cabinet cooling pathways clear and verifying that adjacent high-dissipation components do not block convective airflow.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.