AIP571 S2 Yokogawa Fieldbus Interface Module

Yokogawa AIP571 S2 Fieldbus Interface Module

Yokogawa AIP571 S2 Fieldbus Interface Module

Availability: 10 left in stock

Yokogawa AIP571 S2 Remote I/O Interface Module Configured for high-speed fieldbus integration in CENTUM VP platforms, the Yokogawa AIP571 S2...

SKU: AIP571/S2

Manufacturer: Yokogawa
Product No.: AIP571/S2
Product Type: Remote I/O Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 410g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa AIP571 S2 Remote I/O Interface Module

Configured for high-speed fieldbus integration in CENTUM VP platforms, the Yokogawa AIP571 S2 (AIP571 S2 Interface Module) provides direct electrical execution of process communication between field instrumentation and DCS controllers.

Hardware Specifications

Parameter	Specification
Model	AIP571 S2
Brand	Yokogawa
Origin	Unknown
Weight	0.3 - 0.41 kg
Dimensions	100 x 260 x 45 mm
Operating Temp	0 deg C to 55 deg C
Power Consumption	15 W
System	CENTUM VP / CS DCS
Communication	FOUNDATION Fieldbus H1, RS-485

Process Control and FOUNDATION Fieldbus Connectivity

The AIP571 S2 module operates as a gateway between the fieldbus segments and the DCS backplane. The module architecture incorporates comprehensive channel-to-channel isolation to prevent ground potential shifts from affecting bus data integrity. Furthermore, it manages FOUNDATION Fieldbus H1 segment power and communication traffic. Because the module supports intrinsic safety (Ex ia IIC T6), engineers utilize this device to connect field devices located in hazardous environments directly to the control network.

Frequently Asked Questions

Q: Does the module support hot-swapping during active system operation?

A: You may replace the module without de-energizing the entire backplane. However, you must verify that the DCS control software has marked the segment as "maintenance mode" to prevent loss of signal logs during the extraction process.

Q: How does the module handle communication redundancy?

A: The AIP571 S2 interfaces with the dual-redundant ESB bus. This architecture ensures that the system maintains communication even if one bus path experiences an electrical fault or physical disconnection.

Field Installation Guidelines

Mounting: Secure the module into the designated slot on the remote I/O rack. Tighten the retaining screws to ensure proper grounding and electrical contact with the backplane.
Wiring: Connect the fieldbus segments to the terminal blocks using shielded twisted-pair cables. Maintain proper polarity on the H1 segment to prevent bus communication errors.
Grounding: Terminate cable shields at the designated grounding bar in the cabinet. This practice provides a low-impedance path for noise and surge protection.
Validation: Use a fieldbus diagnostic tool to confirm signal levels on the H1 segments before powering the DCS loops. Ensure the segment voltage sits within the 12-32 VDC range to maintain device loop integrity.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.