IS220PDOAH1BC GE Discrete Output Module

Disponibilidad: 10 Quedan en stock

The GE IS220PDOAH1BC, also cataloged as the IS220PDOA Discrete Output Module, operates as a dedicated hardware component for converting digital...

Código: IS220PDOAH1BC

Manufacturer: GE Fanuc
Product No.: IS220PDOAH1BC
Product Type: Discrete Output Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1420g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE IS220PDOAH1BC, also cataloged as the IS220PDOA Discrete Output Module, operates as a dedicated hardware component for converting digital control logic into binary physical outputs within GE Mark VIe and Mark VIeS platforms. The module interfaces 16 channel-isolated discrete outputs operating at 24-28 VDC nominal voltage to drive solenoids, motor starters, and actuator valve coils with under 10 ms signal response times.

Hardware Specifications

Parameter	Specification
Model	IS220PDOAH1BC (IS220PDOA)
Brand	GE (General Electric)
Origin	USA
Weight	1.42 kg
Dimensions	263 x 58 x 28 mm
Operating Temp	-40 to 70 deg C (-40 to 158 deg F)
Power Consumption	Dual 28 VDC redundant inputs with automatic failover
Output Channels	16 isolated discrete outputs
Output Voltage	24-28 VDC (nominal)
Output Current	1 A per channel (resistive load)
Signal Isolation	500 VDC (channel-to-channel and to ground)
Response Time	< 10 ms
Relative Humidity	5-95% non-condensing
Series Compatibility	GE Mark VIe / Mark VIeS Control Systems

Deterministic Network Backplane Bus Velocity and I/O Density Scaling

The IS220PDOAH1BC communicates over high-speed backplane bus communication velocity pathways to preserve time-critical control loops in Mark VIe/VIeS architectures. Featuring high I/O density scaling across a 16-channel array with 500 VDC galvanic isolation, the module eliminates crosstalk and transient propagation between output lines. Onboard firmware flash compatibility ensures synchronized parameter configuration upon hot-swapping, allowing immediate operational recovery without manual firmware loading or backplane interruptions.

Frequently Asked Questions

Q: Does the IS220PDOAH1BC support live hot-swapping during active system operation?

A: Yes, the module supports online hot-swapping. When replacing an active unit, internal dual 28 VDC power inputs execute automatic failover to prevent voltage drops or output state drops on the redundant backplane bus.

Q: What are the isolation and current limit parameters per channel on the IS220PDOAH1BC?

A: Each individual channel supports up to 1 A resistive load continuous current at 24-28 VDC and features 500 VDC signal isolation both channel-to-channel and to earth ground.

Q: What mounting form factor is required for physical installation?

A: The module utilizes standard rack-mounting dimensions (263 mm x 58 mm x 28 mm) designed to align directly into designated Mark VIe and Mark VIeS I/O rack slots.

Field Installation Guidelines

Verify that the I/O slot in the Mark VIe/VIeS rack is clean and free from physical obstructions before module insertion.
Ensure ESD grounding wrist straps are attached to a bare metal chassis point to protect internal output driver electronics.
Slide the IS220PDOAH1BC into the rack guide rails, pushing evenly until backplane connectors seat completely into the baseboard.
Tighten top and bottom retaining screws to 0.8 Nm (7 in-lbs) to maintain mechanical connection stability and chassis grounding continuity.
Connect output field wiring to the terminal block, ensuring discrete actuator signal lines maintain a minimum 300 mm clearance from AC power cables.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.