KJ3001X1-BJ1 Emerson DeltaV Module Datasheet & Technical Manual

KJ3001X1-BJ1 Emerson DeltaV 12P0683X082 Discrete Output Module

KJ3001X1-BJ1 Emerson DeltaV 12P0683X082 Discrete Output Module

Availability: 99 left in stock

Emerson KJ3001X1-BJ1 DeltaV M-Series/S-Series I/O Subsystem Configured for high-side (source) switching in Emerson DeltaV Distributed Control System (DCS) installations, the...

SKU: KJ3001X1-BJ1

Manufacturer: Emerson
Product No.: KJ3001X1-BJ1
Product Type: Discrete Output Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Emerson KJ3001X1-BJ1 DeltaV M-Series/S-Series I/O Subsystem

Configured for high-side (source) switching in Emerson DeltaV Distributed Control System (DCS) installations, the Emerson KJ3001X1-BJ1 (KJ3001X1-BJ1 Discrete Output Module) provides direct physical/electrical execution. This 8-channel hardware component interfaces the local I/O bus with 24 VDC field loads, converting binary control logic into discrete voltage outputs while maintaining galvanic isolation between system electronics and field circuits.

Hardware Specifications

Parameter	Specification
Model	KJ3001X1-BJ1
Brand	Emerson (DeltaV)
Origin	USA
Weight	0.25 kg
Dimensions	10.7 x 4.1 x 10.5 cm
Operating Temp	0 to +60 deg C
Power Consumption	Local Bus Current: 100 mA typical at 12 VDC
Part Number	12P0683X082
Product Type	Discrete Output (DO) Module
Channel Density	8 Channels
Output Configuration	High-Side (Source) Switching
Nominal Output Voltage	24 VDC
Output Current	Maximum 45 mA per channel
Isolation	Channel-to-system galvanic isolation
Status Indicators	Per-channel ON/OFF LEDs
Compliance	UL, CSA, CE Certified

Process Control & DCS Instrument Characteristics

The module incorporates channel-to-system galvanic isolation to eliminate ground loop currents and safeguard the DeltaV local bus from field-side electrical transients. Each of the 8 discrete output channels features an independent solid-state high-side switch capable of delivering up to 45 mA continuous current at a nominal 24 VDC. Dedicated on-board LED diagnostics provide visual validation of the logical state of each individual channel. The mechanical and electrical backplane interfaces are design-certified for hot-swappable installation, ensuring seamless hot-plugging compatibility within M-series and S-series I/O carriers without disrupting adjacent active processing loops.

Frequently Asked Questions

Q: What are the physical hot-swap limitations when replacing the module under live system conditions?

A: The KJ3001X1-BJ1 allows online removal and insertion under power. However, field-side power supply lines must remain stable during the swap to prevent unintended inductive kickback or localized current surges. The system backplane automatically recognizes the physical replacement module and restores configuration parameters once the hardware connection is locked.

Q: What is the maximum continuous current rating per channel, and can channels be paralleled for higher loads?

A: Each individual output channel supports a maximum continuous load of 45 mA at 24 VDC. Paralleling multiple channels to drive a single high-current load is not supported, as internal propagation delay variances across the solid-state switches can cause unbalanced current distribution and eventual channel failure. High-current field devices require the installation of an external interposing relay.

Q: Does the module support advanced HART loop protocol or line fault detection capabilities?

A: No, the KJ3001X1-BJ1 is a standard discrete binary signaling module designed exclusively for ON/OFF switching tasks. It does not possess analog circuit components required for HART communication, nor does it feature internal open-circuit or short-circuit line monitoring functions.

Field Installation Guidelines

To secure proper mechanical alignment and electrical integrity, installers must slide the module vertically into the designated slot on the M-series or S-series I/O carrier until the dual retention latches click into place. Confirm that the terminal block assembly matches the required 24 VDC high-side sourcing configuration before applying external loop power. All field-side signal cables must use twisted-pair wiring to mitigate electromagnetic interference. Shield wires must terminate at the single-point system ground bar inside the cabinet enclosure and must never form localized ground loops. Maintain a minimum physical separation of 50 mm between low-voltage I/O cables and high-voltage AC power lines within the internal wire ducting paths to suppress cross-talk.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.