CI532V04 ABB Communication Interface Module

ABB CI532V04 3BSE003829R1 Advant Controller Interface

ABB CI532V04 3BSE003829R1 Advant Controller Interface

Availability: 10 left in stock

ABB CI532V04 Communication Interface Module Configured for multi-protocol serial data exchange in Advant Controller 400 series systems, the ABB CI532V04...

SKU: CI532V04

Manufacturer: ABB
Product No.: CI532V04
Product Type: Communication Interface Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 155g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

ABB CI532V04 Communication Interface Module

Configured for multi-protocol serial data exchange in Advant Controller 400 series systems, the ABB CI532V04 (3BSE003829R1) provides direct physical/electrical execution of Allen-Bradley DF-1, Modbus, and RCOM/RCOM+ protocol bridging.

Hardware Specifications

Parameter	Specification
Model	CI532V04
Brand	ABB
Origin	Sweden
Weight	0.155 kg
Dimensions	127 x 25.4 x 254 mm
Operating Temp	-25 deg C to +60 deg C
Power Consumption	5 W
Communication Channels	2 Independent Ports
Data Transfer Rate	Up to 1 Mbps
Mounting	Modular plug-in for AC400 subracks

Industrial Control Communication Connectivity

The CI532V04 module serves as a dual-channel interface, facilitating independent protocol execution across two serial ports. It acts as a gateway between the Advant OCS environment and external industrial equipment, utilizing galvanic isolation on each channel to protect internal control circuits from field-side voltage transients and common-mode noise. By supporting diverse protocols such as DF-1 and Modbus, the module enables the integration of third-party controllers, drives, and analyzers into the DCS architecture. The internal transceiver logic is designed to maintain signal integrity at data transfer rates up to 1 Mbps, ensuring synchronization with the controller's backplane bus communication velocity.

Frequently Asked Questions

Q: Can the two channels on the CI532V04 run different protocols simultaneously?

A: Yes. The dual-channel architecture allows for independent protocol execution, meaning Port 1 can be configured for Allen-Bradley DF-1 while Port 2 operates under Modbus or RCOM, provided the controller configuration supports the assigned addresses.

Q: Is this module capable of hot-swapping?

A: No. The CI532V04 is designed for stationary installation in AC400 subracks. The host controller must be in a powered-down state or the rack power must be isolated before attempting to remove or insert the module to prevent potential electrical damage to the backplane pins.

Field Installation Guidelines

Subrack Seating: Align the module with the dedicated AC400 subrack guides. Press the module inward until the connector pins fully seat into the backplane, then secure the front panel screws to ensure electrical continuity for the chassis ground.
Signal Wiring: Use shielded communication cabling for all serial links. Terminate cable shields to the cabinet ground bus bar at a single point to prevent ground loops that could degrade data transfer rates. Avoid parallel routing with AC power supply lines.
Diagnostics: Utilize the front-panel LED indicators to verify link status. A solid 'Run' LED combined with active 'Port Activity' indicators confirms successful initialization and protocol handshake with external field devices.
Environment: Ensure the module operates within the -25 deg C to +60 deg C range. As the module relies on conductive heat dissipation through the subrack, verify that adjacent slots are properly populated or blanked to maintain required airflow.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.