100% Genuine. 100,000+ Parts in Stock. Ready to Ship.

  • en

ABB REU610 Numerical Voltage Protection Relays

The ABB REU610, also cataloged as the REU610 Voltage Protection Relay, operates as a dedicated hardware component for continuous voltage monitoring and fault isolation within medium-voltage distribution systems. The unit executes three-phase overvoltage, undervoltage, and residual overvoltage detection algorithms through voltage transformer (VT) connections up to 110 VAC. Powered by a wide-range auxiliary supply of 24-250 VDC or 48-240 VAC, the relay processes discrete trip logic and outputs binary signals to safeguard busbars, transformers, and motors.

Hardware Specifications

Parameter Specification
Model REU610
Brand ABB
Origin Sweden / Finland
Weight 2.5 kg
Dimensions 160 mm x 180 mm x 200 mm
Operating Temp -25 to +70 deg C
Power Consumption Universal auxiliary input: 24-250 VDC or 48-240 VAC
Voltage Input Rating Up to 110 VAC (secondary VT connection)
Protection Logic 3-phase overvoltage, 3-phase undervoltage, residual overvoltage
Frequency Rating 50 / 60 Hz (configurable)
Binary I/O Multiple programmable digital inputs and outputs
Bus Protocols Modbus RTU, IEC 60870-5-103, SPA bus
Enclosure Rating IP20 rear terminals

Backplane Bus Communication Velocity and Deterministic Networks

Substation automation systems rely on deterministic network layers to transmit critical alarm events and diagnostic records. The REU610 integrates Modbus RTU, IEC 60870-5-103, and SPA bus protocol execution directly across serial communication channels. Deterministic processing guarantees low latency during voltage fault conditions, allowing the internal disturbance recorder and event logger to transfer data to control interfaces without delaying protective trip outputs.

Frequently Asked Questions

Q: How do operators connect primary field voltages to the REU610 relay? A: Step-down voltage transformers (VT) step down primary lines to connect directly to the 110 VAC maximum secondary voltage terminals on the relay rear panel.

Q: What power options exist for supplying auxiliary operating power to the REU610? A: The universal auxiliary power block accepts either direct current inputs ranging from 24 to 250 VDC or alternating current inputs from 48 to 240 VAC.

Q: How does the unit preserve fault event history during power interruptions? A: An internal memory buffer logs disturbance data and event history, retaining records through power loss for subsequent retrieval via communication buses.

Field Installation Guidelines

  1. Cut out panel space to accommodate the 160 mm x 180 mm flush-mount enclosure and secure the unit using panel clamps.
  2. Verify that VT secondary circuits are de-energized before terminating signal wires onto the rear IP20 screw terminals.
  3. Wire the universal auxiliary supply to designated power terminals ensuring proper voltage selection within 24-250 VDC or 48-240 VAC ranges.
  4. Run serial communication lines using shielded twisted-pair cables, keeping them separate from primary power conductors.
  5. Connect the dedicated chassis grounding screw directly to the cabinet main earth bar using a heavy copper conductor.

What's clients say about us

Translation missing: en.general.search.loading