Configured for Profibus DPV1 fieldbus communication in ABB Freelance 2000 DCS and drive networks, the ABB DFM01 (37262-4-0369570 Profibus DPV1 Fieldbus Communication Module) provides direct physical/electrical data exchange between system controllers and field-level devices.
| Model | Description |
|---|---|
| DFM01 | Base Profibus DPV1 Communication Module |
| 37262-4-0369570 | Primary Catalog Part Number |
| 3926240369570 | Global Identifier / Order Reference |
| Parameter | Specification |
|---|---|
| Model | DFM01 |
| Brand | ABB |
| Origin | Germany / Various |
| Weight | 0.48 kg |
| Dimensions | 120 mm x 61 mm x 40 mm |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 24 VDC (Approx. 2 W) |
| Protocol | Profibus DPV1 (9.6 kbps to 12 Mbps) |
| Mounting | 35 mm DIN Rail (IP20) |
The DFM01 module enables deterministic data transmission across the Freelance 2000 environment by supporting both cyclic and acyclic communication profiles. The module firmware flash compatibility allows for seamless integration with existing GSD files, ensuring that timing constraints for process control loops are strictly maintained. By providing a low-latency gateway, the module minimizes jitter during high-speed polling of ACS drive parameters. The hardware architecture enforces signal isolation, which protects the internal backplane bus from potential surge voltages originating on the field-level Profibus segments.
Q: Can the DFM01 maintain communication integrity if the baud rate varies across segments?
A: The module features auto-detecting baud rate functionality from 9.6 kbps to 12 Mbps. However, all devices on a specific Profibus segment must be configured to the same baud rate to ensure deterministic network stability.
Q: How does the DPV1 capability affect the primary control cycle?
A: The DPV1 acyclic service capability allows the module to handle device parameterization and diagnostic data as a background task, preventing interruptions to the time-critical cyclic process data exchange.
Mount the DFM01 on a standard 35 mm DIN rail in an environment free from excessive vibration. Ensure that the Profibus cable shielding is terminated according to standard industrial practices—using appropriate EMC-rated connectors—to ground the shield at the entry point of the control cabinet. For installations exceeding 100 m at high baud rates, utilize active bus terminators to prevent signal reflections. Verify that the 24 VDC power supply maintains voltage levels within the specified range, as fluctuations can induce communication timeouts on the Profibus network.
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.