DS200ACNAG1ADD GE ARCNET Communication Card

DS200ACNAG1ADD GE Mark V High-Speed Communication Board

DS200ACNAG1ADD GE Mark V High-Speed Communication Board

Availability: 99 left in stock

GE DS200ACNAG1ADD Mark V ARCNET Board The GE DS200ACNAG1ADD, also cataloged as the DS200ACNAG1A ARCNET Communication Board, operates as a...

SKU: DS200ACNAG1ADD

Manufacturer: GE Fanuc
Product No.: DS200ACNAG1ADD
Product Type: Communication Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

GE DS200ACNAG1ADD Mark V ARCNET Board

The GE DS200ACNAG1ADD, also cataloged as the DS200ACNAG1A ARCNET Communication Board, operates as a dedicated hardware component for deterministic token-passing data transmission and analog signal routing within GE Mark V control system networks. The board interfaces 16 isolated analog input channels and executes high-speed network communication via BNC coaxial connectors, delivering a 2.5 Mbps transmission rate across peripheral sub-bus connections.

Hardware Specifications

Parameter	Specification
Model	DS200ACNAG1ADD
Brand	GE
Origin	USA
Weight	1.2 kg
Dimensions	279.4 mm x 203.2 mm (11 in x 8 in)
Operating Temp	-20 to 70 deg C
Power Consumption	+5 VDC (+/-5% tolerance)
Communication Protocol	ARCNET (Deterministic Token-Passing)
Transmission Rate	2.5 Mbps typical
Physical Interface	External coaxial BNC connectors & backplane bus
Analog Signal Support	16 isolated channels (16-bit resolution)
Configurable Voltage Ranges	+/-10 V, 0 to 5 V, or 0 to 10 V
Galvanic Isolation	1500 VAC/DC channel-to-channel protection

Deterministic ARCNET Protocol & Backplane Bus Communication Velocity

The DS200ACNAG1ADD optimizes backplane bus communication velocity by offloading network frame management from the main processor. The onboard token-passing ARCNET architecture maintains deterministic media access, preventing frame collisions during high-traffic signal bursts. High-density signal routing supports 16-bit analog conversion across 16 isolated channels, where firmware flash compatibility maintains aligned data structures and configuration parameters across connected peripheral cards.

Frequently Asked Questions

Q: What physical connectors execute external ARCNET network wiring on the DS200ACNAG1ADD?

A: The board features dedicated coaxial BNC connectors mounted directly to the board edge for low-impedance physical layer connections.

Q: What analog input voltage ranges can be configured on the board's 16 input channels?

A: The input channels accept jumper-configurable voltage scales of +/-10 V, 0 to 5 V, or 0 to 10 V DC with 16-bit analog-to-digital resolution.

Q: Does replacing the DS200ACNAG1ADD require re-terminating the ARCNET coaxial trunk cable?

A: No, the coaxial cable connects via quick-disconnect BNC couplers, allowing replacement of the circuit board without altering the coaxial cable assembly.

Field Installation Guidelines

Shut down power to the Mark V control rack before inserting or removing the DS200ACNAG1ADD board. Align the board edges with the enclosure card guides and slide the assembly smoothly into the backplane slot until the backplane connectors fully seat. Secure the retaining thumb screws on the faceplate to establish a continuous chassis ground connection. Attach the RG-62 coaxial cables to the front BNC connectors, ensuring a firm quarter-turn lock. Verify that proper 93-ohm end-of-line termination resistors are installed on unused BNC ports of the ARCNET network line to prevent signal reflection.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.