GE Fanuc IC200CBL001 VersaMax Programming Cable

Availability: 10 left in stock

The GE Fanuc IC200CBL001, also cataloged as the IC200CBL001 Programming Cable, operates as a dedicated hardware component for point-to-point serial...

SKU: IC200CBL001

Manufacturer: GE Fanuc
Product No.: IC200CBL001
Product Type: Programming Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 140g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE Fanuc IC200CBL001, also cataloged as the IC200CBL001 Programming Cable, operates as a dedicated hardware component for point-to-point serial data transfer within VersaMax system networks. The cable provides an RS-232 connection between programming workstations and RS-232 Port 1 on the PLC controller.

Hardware Specifications

Parameter	Specification
Model	IC200CBL001
Brand	GE Fanuc
Origin	USA
Weight	0.31 lbs (0.14 kg)
Dimensions	15 m (50 ft) cable length
Operating Temp	Up to 80 deg C maximum
Power Consumption	Passive physical media (30 V voltage rating)
Cable Type	Straight-through RS-232 serial cable
Connectors	9-pin D-sub male to 9-pin D-sub female (crimp style)
Data Transfer Rate	Up to 115,200 bps maximum
Conductor Specification	24 AWG copper
Shielding	Overall electromagnetic interference (EMI) shield
Designated Port	RS-232 Port 1 on VersaMax PLC

Backplane Bus Communication Velocity & Firmware Flash Compatibility

The serial cable facilitates hardware link execution at data transmission rates up to 115,200 bps without introducing physical latency over its 15 m length. The assembly utilizes 24 AWG copper conductors enveloped in a grounded shield layer to suppress signal cross-talk and ambient high-frequency noise. This physical media path ensures firmware flash compatibility and error-free bit-stream delivery during PLC CPU memory clearing, program downloading, and online logic execution monitoring via serial Port 1.

Frequently Asked Questions

Q: What connector types are constructed on the ends of the IC200CBL001 cable?

A: The cable utilizes a 9-pin D-sub male connector on one end and a 9-pin D-sub female connector on the opposite end.

Q: What is the maximum baud rate supported by the cable assembly?

A: The cable supports serial communication data rates up to a maximum of 115,200 bps.

Q: Does the IC200CBL001 cable incorporate noise shielding?

A: Yes, the cable incorporates an integrated shielding layer over 24 AWG copper conductors to prevent electromagnetic interference.

Field Installation Guidelines

Inspect both 9-pin D-sub connectors for bent pins or debris prior to attachment.
Connect the cable directly to RS-232 Port 1 on the VersaMax PLC unit.
Attach the opposite 9-pin connector to the serial port of the programming computer or serial converter.
Tighten connector jack-screws finger-tight to secure electrical contact and maintain ground continuity through the shield.
Route the 15 m cable away from high-voltage AC power lines and variable frequency drive output cables.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.