GE Fanuc IC200UAL005 VersaMax Micro 23 PLC

Availability: 10 left in stock

The GE Fanuc IC200UAL005, also cataloged as the IC200UAL005 Micro 23 PLC, operates as a dedicated hardware component for mixed...

SKU: IC200UAL005

Manufacturer: GE Fanuc
Product No.: IC200UAL005
Product Type: CPU Processors
Product Origin: USA
Payment:T/T, Western Union
Weight: 910g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The GE Fanuc IC200UAL005, also cataloged as the IC200UAL005 Micro 23 PLC, operates as a dedicated hardware component for mixed digital and analog signal processing within VersaMax Micro platforms.

Hardware Specifications

Parameter	Specification
Model	IC200UAL005
Brand	GE Fanuc Emerson
Origin	USA / Various
Weight	0.91 kg (2.00 lbs)
Dimensions	Standard VersaMax Micro housing
Operating Temp	0 to 60 deg C
Power Consumption	8 W input power supply rating
Rated Supply Voltage	24 VDC nominal
Typical Input Current	0.3 A at 24 VDC
Maximum Inrush Current	1 A for 10 ms at 30 VDC
DC Input Channels	13 Discrete DC inputs
Analog Input Channels	2 Analog inputs
Relay Output Channels	9 Relay outputs
Analog Output Channels	1 Analog output
DC Output Channels	1 Discrete DC output
Total I/O Capacity	26 Mixed I/O points

Backplane Bus Communication Velocity & I/O Density Scaling

The IC200UAL005 combines 13 discrete DC inputs, 2 analog inputs, 9 relay outputs, 1 DC output, and 1 analog output within a single compact chassis to achieve optimized I/O density scaling. The controller maintains deterministic cycle timing and high backplane bus communication velocity across all onboard channels during real-time scan execution. Integrated system registers maintain firmware flash compatibility across the VersaMax Micro family, enabling direct expansion connection and deterministic analog-to-digital signal conversion.

Frequently Asked Questions

Q: What are the primary power supply input characteristics for the IC200UAL005 controller?

A: The module operates at 24 VDC with an overall power rating of 8 W, drawing a typical operating current of 0.3 A at 24 VDC with an inrush limit of 1 A for 10 ms at 30 VDC.

Q: How is the channel density distributed across the IC200UAL005 main terminal blocks?

A: The controller hosts 26 total I/O points, divided into 13 DC inputs, 2 analog inputs, 9 electromechanical relay outputs, 1 solid-state DC output, and 1 analog output channel.

Field Installation Guidelines

Enclosure and DIN-Rail Mounting: Mount the controller on a 35 mm DIN rail or attach directly to a grounded metal backplate using mounting screws. Allow 50 mm clearance on all sides for passive cooling airflow.
Power and Signal Wiring Separation: Connect the 24 VDC power feed to the designated terminals. Separate low-voltage analog signal cables from AC/DC relay contact power lines to eliminate crosstalk and signal distortion.
Shield Grounding: Terminate all analog cable shielding at a single protective earth ground point near the unit to maintain electrical noise suppression across input/output channels.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.