The GE Fanuc IC693BEM321, also cataloged as the IC693BEM321 I/O Link Master Module, operates as a dedicated hardware component for serial data coordination and slave node management within Series 90-30 PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693BEM321 |
| Brand | GE Fanuc Emerson |
| Origin | United States |
| Weight | 0.26 kg (0.56 lbs) |
| Dimensions | Standard single-slot width module |
| Operating Temp | 0 to 60 deg C |
| Storage Temp | -40 to 85 deg C |
| Power Consumption | Industry standard for Series 90-30 communication modules |
| Slave Capacity | Maximum 16 slave devices |
| Input Capacity | 1024 discrete inputs |
| Output Capacity | 1024 discrete outputs |
| Maximum Units per CPU | 6 master modules |
| Physical Connector | 20-pin Honda-type socket |
| Communication Signal Layer | RS-422 and RS-485 signal levels |
Profinet / EtherNet/IP Deterministic Networks and I/O Density Scaling
The module handles distributed field data exchange across dedicated serial sub-networks, preventing configuration blockages on the backplane and securing stable backplane bus communication velocity. During extreme I/O density scaling reaching up to 1024 discrete input and output points, the processing architecture offloads raw transmission cycles from the host CPU. This interface preserves system configuration parameters and maintains total framework compliance when interfacing with modern Profinet / EtherNet/IP deterministic networks via upstream gateways, guaranteeing firmware flash compatibility remains intact across legacy architectures.
Frequently Asked Questions
Q: What is the maximum aggregate discrete I/O count possible using multiple IC693BEM321 modules under one CPU?
A: Since a single CPU accommodates a maximum of 6 master modules, and each module handles a fixed matrix of 1024 discrete inputs and 1024 discrete outputs, the total system capability can be scaled up to 6144 discrete inputs and 6144 discrete outputs.
Q: Is manual jumper configuration required on the circuit board to switch between RS-422 and RS-485 signaling?
A: No. The physical layer adjustments are executed dynamically through the internal circuitry and the specific pinout wiring scheme implemented at the 20-pin Honda-type socket connection point.
Field Installation Guidelines
- Terminate all incoming electrical supply lines to the Series 90-30 baseplate prior to performing module installation or extraction.
- Slide the module into the selected chassis slot, confirming that the backplane connector locks flush against the host bus receptables.
- Secure the 20-pin Honda-type interface cable plug onto the front mating socket using the module retaining screws to prevent intermittent connection drops under mechanical strain.
- Route the RS-422/RS-485 communication line separate from high-voltage variable frequency drive cables to mitigate electrical noise across the data lanes.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading