The GE Fanuc IC693CBL327, also cataloged as the IC693CBL327 High Density I/O Cable, operates as a dedicated hardware component for field signal wiring and point-to-point electrical interconnection within Series 90-30 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693CBL327 |
| Brand | GE Fanuc / Emerson |
| Origin | USA / As specified on label |
| Weight | 0.94 lbs (0.43 kg) |
| Dimensions | Cable length: 10 ft (3 m); Connector Depth Clearance: 2.0 in (51 mm) |
| Operating Temp | Standard industrial operating range |
| Power Consumption | Passive wiring interface (1.2 A current rating per conductor) |
| Cable Type | High density I/O wiring cable (Unshielded) |
| Conductor Gauge | 24 AWG (#24 AWG) individual wires |
| PLC Side Connector | Right-angle 24-pin D connector (Fujitsu FCN-365S024-AU compatible) |
| Field Side Interface | Flying leads for user-supplied terminal connection |
| Replacement Target | Replaces IC693CBL315 cable |
| Compatible Modules | IC694MDL752, IC694MDL753, and 16-pt / 32-pt I/O modules |
Backplane Bus Communication Velocity and I/O Density Scaling
The IC693CBL327 cable provides direct physical signal routing between 16-point or 32-point high-density discrete I/O modules and external field termination panels. Featuring a right-angle 24-pin Fujitsu connector design, it minimizes cabinet depth requirements while supporting maximum I/O density scaling across rack slots. The 24 AWG unshielded copper conductors support a continuous current rating of 1.2 A per channel, transmitting field inputs and outputs to the module interface without introducing latency to local backplane scan cycles.
Frequently Asked Questions
Q: What is the connector orientation on the module interface side of the IC693CBL327 cable?
A: The PLC-side connection features a right-angle 24-pin connector designed to maintain a 2-inch clearance depth in tight enclosure configurations.
Q: How are field devices wired to the opposite end of the IC693CBL327 cable assembly?
A: The field end terminates in raw flying leads, enabling direct connection to user-supplied terminal blocks or custom field distribution panels.
Field Installation Guidelines
- Insert the 24-pin right-angle connector squarely into the front-panel header of the target I/O module, ensuring the locking latches click firmly to establish contact.
- Route the 10-foot unshielded cable harness through dedicated wire ducting, maintaining physical separation from high-voltage AC lines and motor drives to prevent noise coupling.
- Strip and land the 24 AWG flying leads onto appropriate terminal strip points using correct wire termination torque tools.
- Verify channel pinout mappings against module wiring diagrams before applying external power to field input or output circuits.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading