The GE Fanuc IC693PRG300, also cataloged as the IC693PRG300 Handheld Programmer, operates as a dedicated hardware component for direct logic instruction entry and system parameter monitoring within Series 90-30 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PRG300 |
| Brand | GE Fanuc Emerson |
| Origin | USA |
| Weight | 0.75 lbs (0.34 kg) |
| Dimensions | Handheld portable footprint |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 5 VDC supply voltage rating |
| Display Technology | LCD display (2 lines x 16 characters) |
| Keypad Configuration | 42 keys (6 x 7 tactile feedback keypad) |
| Operating Modes | 4 modes (Program Mode, Protection Mode, Data Mode, Configuration Mode) |
| Connector Type | 15-pin D-type serial connector |
| Programming Language | Statement List (SL) language |
| Memory Architecture | Expandable non-volatile memory |
| Interconnect Distance | 2 meters (6 feet) recommended cable length |
Backplane Bus Communication Velocity & Interface Compatibility
The IC693PRG300 interfaces directly with Series 90-30 power supply serial ports via a 15-pin D-type connector to maintain real-time register access and data transfer. Utilizing a 5 VDC supply rail sourced through the serial link, the unit executes code compilation in Statement List language without degrading backplane bus communication velocity. Onboard firmware flash compatibility and non-volatile memory storage retain user programs and system configurations through power cycles. Four selectable operational modes (Program, Protection, Data, and Configuration) provide low-latency execution for field parameter monitoring and program transfers.
Frequently Asked Questions
Q: How is the IC693PRG300 powered during field operation?
A: The handheld programmer operates on a 5 VDC supply voltage rating, drawing power directly through the 15-pin D-type serial cable connection attached to the CPU or power supply port.
Q: What programming language and memory types are supported by this unit?
A: The unit utilizes Statement List (SL) language for code entry and program edits, backed by expandable non-volatile memory that preserves stored data when disconnected from power.
Q: What are the cable length recommendations for connecting the programmer to a PLC?
A: GE Fanuc specifies a recommended cable length of 2 meters (6 feet) using the standard 15-pin D-type serial interconnect to ensure signal integrity.
Field Installation Guidelines
- Ensure the PLC system serial port is accessible and free of debris prior to attaching the programming interface cable.
- Align the 15-pin D-type connector with the mating port on the Series 90-30 power supply or CPU baseplate.
- Tighten the connector jack screws finger-tight to secure electrical grounding and prevent accidental disconnection during operation.
- Verify that the cable run does not exceed the recommended 2-meter limit to prevent voltage drop and serial data distortion.
- Use the 42-key tactile keypad to select between Program, Protection, Data, and Configuration modes depending on the field servicing procedure required.
What's clients say about us
Excellent Emergency Support!
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Mark Thompson
Maintenance Manager, USAReliable Source for New Spares
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
Robert Hoffmann
Engineering Lead, GermanyTop-tier Service and Quality
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.
Lucas Müller
Operations Director, GermanyRelated Products
Guide
Translation missing: en.general.search.loading